« previous next »
Pages: [1]   Go Down

Author Topic: Another Flat Horn  (Read 2452 times)

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18392
  • AKA TimBuckII
Another Flat Horn
« on: August 12, 2012, 12:12:58 AM »
 It is pretty big for a flat horn at about 14” around the curve and 3 ½” at the Pine base Four steel pins that hold the base and band in place. The tip is two part antler pined together with 3 steel pins and to the horn itself with 3 more. The bands are also pinned in place. Although hard to see the horn itself is paneled.

  Tim C.




« Last Edit: February 23, 2020, 09:50:18 PM by Tim Crosby »
Logged

Offline skillman

  • Hero Member
  • *****
  • Posts: 996
  • The Usual Suspect
Re: Another Flat Horn
« Reply #1 on: August 12, 2012, 12:34:25 AM »
Nice job Tim. It was a small enough horn at the butt that it's got good shape when flattened. I also like the color in it.

Steve
Logged
Steve Skillman

Offline bigsmoke

  • Sr. Member
  • ****
  • Posts: 438
Re: Another Flat Horn
« Reply #2 on: August 12, 2012, 04:54:48 AM »
Nice Tim.  I really like that one.

John
Logged

Offline The Original Griz

  • Sr. Member
  • ****
  • Posts: 444
Re: Another Flat Horn
« Reply #3 on: August 12, 2012, 02:07:20 PM »
Me too, that is a sweetie, I like it when the band distances are real close and this one is...very nice
Logged
“I predict future happiness for Americans if they can prevent the government from wasting the labors of the people under the pretense of taking care of them.”
Thomas Jefferson
www.timsannerpowderhorns.com

Horner75

  • Guest
Re: Another Flat Horn
« Reply #4 on: August 12, 2012, 05:10:49 PM »
Tim, Another fine example of your skill in horn making and an excellent example of one my favorite type of powder horns!

Rick
Logged
Pages: [1]   Go Up
« previous next »