« previous next »
Pages: [1]   Go Down

Author Topic: Pistol barrels  (Read 7800 times)

Offline Chris Treichel

  • Hero Member
  • *****
  • Posts: 916
Pistol barrels
« on: January 11, 2013, 11:19:36 PM »
Anyone else notice that pistol barrels are going out of stock everywhere?
Logged

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19520
Re: Pistol barrels
« Reply #1 on: January 11, 2013, 11:58:34 PM »
Darn pirates!
Logged
Andover, Vermont

Offline tallbear

  • Global Moderator
  • Hero Member
  • *
  • Posts: 4053
  • Mitch Yates
Re: Pistol barrels
« Reply #2 on: January 12, 2013, 12:15:46 AM »
Barrel makers can't keep up with their rifle barrel orders.They make more money on rifle barrels as opposed to pistol barrels.Hence a shortage of pistol barrels :( :(

Mitch
Logged

Offline Don Getz

  • Hero Member
  • *****
  • Posts: 6853
Re: Pistol barrels
« Reply #3 on: January 12, 2013, 01:10:01 AM »
Mitch.......you hit that one right on the head.    When I was making barrels, we did very few pistol barrels, mainly because
it kept me from making rifle barrels...........Don
Logged

Offline Chris Treichel

  • Hero Member
  • *****
  • Posts: 916
Re: Pistol barrels
« Reply #4 on: January 12, 2013, 01:23:24 AM »
I guess that makes sense. 
Logged

Offline WadePatton

  • Hero Member
  • *****
  • Posts: 5303
  • Tennessee
Re: Pistol barrels
« Reply #5 on: January 12, 2013, 01:30:07 AM »
i'm real happy the domestic makers of things have plenty of work.

even if the work is boring.

rimshot. ;D
« Last Edit: January 12, 2013, 02:52:26 AM by WadePatton »
Logged
Hold to the Wind

LehighBrad

  • Guest
Re: Pistol barrels
« Reply #6 on: January 12, 2013, 02:01:45 AM »
Hmmm.....one 42 inch long rifle barrel.....and a hack saw.....equals four 10-1/2 inch long pistol barrels right??? ;D

Double rimshot... :D
Logged

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19520
Re: Pistol barrels
« Reply #7 on: January 12, 2013, 02:23:58 AM »
If you get the rifle barrel in a fast twist!
Logged
Andover, Vermont

Offline pathfinder

  • Hero Member
  • *****
  • Posts: 731
Re: Pistol barrels
« Reply #8 on: January 12, 2013, 02:34:21 AM »
Like anyone can hit ANYTHING with a pistol!

Double rim shot!
Logged
Not all baby turtles make to the sea!  Darwinism. It’s works!

Offline WadePatton

  • Hero Member
  • *****
  • Posts: 5303
  • Tennessee
Re: Pistol barrels
« Reply #9 on: January 12, 2013, 02:53:16 AM »
Quote from: rich pierce on January 12, 2013, 02:23:58 AM
If you get the rifle barrel in a fast twist!
i think this way as well.   ;)
Logged
Hold to the Wind

Offline D. Taylor Sapergia

  • Member 3
  • Hero Member
  • *
  • Posts: 12671
Re: Pistol barrels
« Reply #10 on: January 12, 2013, 03:26:18 AM »
I once bought a 32" x 15/16" parallel octagonal .45 cal x 1:22 twist barrel from Numerich.  It made three pistols.  The most accurate pistol barrel I've ever seen - almost.  My Richard Hoch .60 cal on my Hawken pistol is THE most accurate.

Green Mt. also makes very accurate pistol barrels, when you can get them.
Logged
D. Taylor Sapergia
www.sapergia.blogspot.com

Art is not an object.  It is the excitement inspired by the object.

Offline elk killer

  • Hero Member
  • *****
  • Posts: 1514
Re: Pistol barrels
« Reply #11 on: January 12, 2013, 03:59:06 PM »
this will cause a stir....
had 2 .54 cal pistols..
1 was 1:22 twist one was 1:66 twist
both were 8 inches long, both flintlocks
could tell very little difference in accuracy..
was shooting at the end of a log about 40 yards away, about 8 inches dia,
each pistol hit the end of the log each and every time
of course wasnt a 1 hole group, but accurate enough..
killed many ground hogs with both pistols
Logged
only flintlocks remain interesting..

Offline Chris Treichel

  • Hero Member
  • *****
  • Posts: 916
Re: Pistol barrels
« Reply #12 on: January 17, 2013, 09:04:21 PM »
What I am thinking of is building a dragoon pistol but all the barrels I am finding out there are at least 2-4 inches too short.  I am looking into at least a 14 inch barrel. 

So, what about using a shotgun barrel? Cut that down and thread it... I come accross good barrels quite frequently and conversion to a pistol should be easy... their round barrels and usually arround 20-24 inches long... etc. probably a 20 or 16 ga barrel should work.  Any opinions?
Logged

Offline davec2

  • Hero Member
  • *****
  • Posts: 2955
    • The Lucky Bag
Re: Pistol barrels
« Reply #13 on: January 18, 2013, 04:09:33 AM »
Chris,

I had Ed Rayl make me a pair of brass Dragoon barrels in .62 cal. not long ago.  They are 12 inches long, but I think he will make them as long or short as you like.  I didn't have to wait that long for them either.  Don't know what his situation is now.  I also bought a barrel from him that had a good rifled .58 bore, but the outside was messed up during the milling of octagonal flats.  He sold it to me very inexpensively and I chucked it up in the lathe and turned it round and tapered to make an excellent pistol barrel.

This pair was made with one barrel from the Rifle Shop and one from Ed in steel.  12 inch barrels:




« Last Edit: February 21, 2020, 10:59:12 AM by davec2 »
Logged
"No man will be a sailor who has contrivance enough to get himself into a jail; for being in a ship is being in a jail, with the chance of being drowned... a man in a jail has more room, better food, and commonly better company."
Dr. Samuel Johnson, 1780

Offline D. Taylor Sapergia

  • Member 3
  • Hero Member
  • *
  • Posts: 12671
Re: Pistol barrels
« Reply #14 on: January 18, 2013, 04:31:46 AM »
Beautiful brace of pistols, Dave.
Logged
D. Taylor Sapergia
www.sapergia.blogspot.com

Art is not an object.  It is the excitement inspired by the object.

Offline smart dog

  • Global Moderator
  • Hero Member
  • *
  • Posts: 7009
Re: Pistol barrels
« Reply #15 on: January 18, 2013, 05:49:22 AM »
Chris,
Kevin Blackley has 14" 0.625 cal tapered round pistol barrels suitable for English and French military pistols.  The finished barrels fitted with breech plugs are expensive but you can also get unfinished blanks for a lot less.

http://www.blackleyandson.com/acatalog/Barrels.html

Dave C. you do great work.  Really nice pistols!!


dave
« Last Edit: January 18, 2013, 05:53:49 AM by smart dog »
Logged
"The main accomplishment of modern economics is to make astrology look good."

Offline Chris Treichel

  • Hero Member
  • *****
  • Posts: 916
Re: Pistol barrels
« Reply #16 on: January 18, 2013, 06:32:26 AM »
Thank you, those are some great ideas. 
Logged

Offline RichG

  • Sr. Member
  • ****
  • Posts: 455
Re: Pistol barrels
« Reply #17 on: January 18, 2013, 07:07:06 AM »
try the gun works in Springfield Oregon. Joe usually has a number of pistol barrels on hand.[email]thegunworks.com
Logged

Offline davec2

  • Hero Member
  • *****
  • Posts: 2955
    • The Lucky Bag
Re: Pistol barrels
« Reply #18 on: January 18, 2013, 11:46:29 AM »
Dave & Taylor,

Thanks...these were fun to build (except for the butt cap inletting) but if I ever make a pair of anything again, I will build them in parallel.  These were built in series and it seemed much harder to get them to match that way.  They are a $#*! of a lot of fun to shoot two at a time.  No sights, but I surprised myself at what I can hit just sighting over the tang screw and the muzzle.
Logged
"No man will be a sailor who has contrivance enough to get himself into a jail; for being in a ship is being in a jail, with the chance of being drowned... a man in a jail has more room, better food, and commonly better company."
Dr. Samuel Johnson, 1780

Offline Chris Treichel

  • Hero Member
  • *****
  • Posts: 916
Re: Pistol barrels
« Reply #19 on: January 18, 2013, 06:45:31 PM »
http://fcibarrels.tripod.com/pistol.html Looks like he has/makes what I am looking for. Now to finish my current projects.
Logged
Pages: [1]   Go Up
« previous next »