Author Topic: Russ Hamm .50 on Cherry's  (Read 5000 times)

Offline Kermit

  • Hero Member
  • *****
  • Posts: 3099
Russ Hamm .50 on Cherry's
« on: February 26, 2013, 06:16:58 PM »
A very nice looking carved and brass mounted curly maple Russ Hamm rifle is listed on Cherry's. Looks very nice, and the price is attractive. I have no interest in this rifle's sale nor in Cherry's. I thought there might be some interest here. The listings are alphabetical, so scroll down.

http://www.cherrys.com/longguns.htm
"Anything worth doing is worth doing slowly." Mae West

Offline gusd

  • Sr. Member
  • ****
  • Posts: 303
Re: Russ Hamm .50 on Cherry's
« Reply #1 on: February 26, 2013, 10:46:29 PM »
Thanks for sharing! Could hardly buy the parts for $2000
Very nicely done!
Gus

Offline G-Man

  • Hero Member
  • *****
  • Posts: 2217
Re: Russ Hamm .50 on Cherry's
« Reply #2 on: February 26, 2013, 11:19:11 PM »
Very nice - I am not sure how they determined it is by Russ Hamm - if the barrel is signed?  The work to me looks a bit like Tom White - the engraver/horner/gunbuilder who was doing some fine work by the early 70s. 

It is very well done - looks to me like it might be from the mid 70s to early 80s - the carving and wood finish are particularly nice for an era when there were not very many people doing work of this quality. 

Guy

Bennypapa

  • Guest
Re: Russ Hamm .50 on Cherry's
« Reply #3 on: February 27, 2013, 06:51:13 PM »
I'd like to repeat the thank you for sharing.
That is some fine work and I'm glad to get to see it.
Ben

Offline Majorjoel

  • Hero Member
  • *****
  • Posts: 3138
Re: Russ Hamm .50 on Cherry's
« Reply #4 on: February 28, 2013, 04:40:15 PM »
I have been looking at this rifle for a few weeks now. A nice Maryland piece made back when it was make your own parts or settle on the few available. I wonder if just the lock was made by Russ Hamm. There may be a signature under the barrel flats perhaps? G-Man, where is Tom White from? Do you know if he is still around?
Joel Hall

Offline G-Man

  • Hero Member
  • *****
  • Posts: 2217
Re: Russ Hamm .50 on Cherry's
« Reply #5 on: February 28, 2013, 05:33:17 PM »
Tom White is from northern Ohio and is still around - I don't know if he does any horns or guns anymore, but is a fantastic engraver and I believe sells engraving equipment and supplies as well.  I really don't know if he made this but the carving and engraving on this rifle look like his work to me - but I have no idea for sure.

Back in the early 1970s he was pretty much "the" guy with regard to custom horns - his horn engraving is really fine quality.  In that era  many guys sought after a Tom White horn and a Gary Birch bag to go with your rifle.  He made some nice rifles too and I remember seeing a few over the years. A few passed through E Christopher Firearms in Miamitown, OH, and if I am not mistaken Tom probably had some influence from Jack Haugh via that connection and Friendship in the 60s and early 70s.  I think he might have made a few that sold through Golden Age Arms as well as I am sure he spent some time at Jim Johnson's shop up in Delaware as well.  I know he did the nice line drawings for Jim's book "Building the Kentucky Rifle" (still about the best $10 you can spend if you are building your first rifle).

I was wondering if perhaps the gun is marked Russ Hamm somewhere other than a barrel signature - i.e. perhaps this was even a personal gun of Mr. Hamm's made for him by Tom White or someone else.    In any case it is beautiful work from that era.  I really like this rifle - brings to mind the time when I was first getting interested in this stuff.

Guy

Offline Gaeckle

  • Hero Member
  • *****
  • Posts: 1360
Re: Russ Hamm .50 on Cherry's
« Reply #6 on: February 28, 2013, 05:39:04 PM »
The lock would have "HAMM" on the inside of the lockplate......I believe that Mr. White lived in Columbus. I met him a few times in Friendship. He was always puttzing around with John Plybon (what a great man....he left us too early!)

I'm not sure if White is still living, still active or his where abouts......

Online rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19522
Re: Russ Hamm .50 on Cherry's
« Reply #7 on: February 28, 2013, 06:40:51 PM »
Great carving.  Use the zoom in feature.
Andover, Vermont

Birdhunter

  • Guest
Re: Russ Hamm .50 on Cherry's
« Reply #8 on: March 01, 2013, 10:17:52 PM »
Kermit,
Russ Hamm was a local lock maker here in West Central IN. He later sold the business to Dean Mitton who retained the Hamm name on his locks.
Birdhunter

Dean2

  • Guest
Re: Russ Hamm .50 on Cherry's
« Reply #9 on: March 03, 2013, 07:10:58 PM »
A very nice looking carved and brass mounted curly maple Russ Hamm rifle is listed on Cherry's. Looks very nice, and the price is attractive. I have no interest in this rifle's sale nor in Cherry's. I thought there might be some interest here. The listings are alphabetical, so scroll down.

http://www.cherrys.com/longguns.htm

I took a look at this gun and used the zoom feature. The gun is okay but I don't find the wood to metal fit all that good on the inlays nor do the lines of the carving look as smooth as they should. The left side of the gun seems to be better done than the right side. While I agree that parts would cost around a $1,000 to replicate, and I am not saying I could do near as well, there are a lot of contemporary builders doing nicer work for very close to the same money on a brand new gun.

The R.N. Williams gun on the same site; rifle is in okay shape for its age but there are lots of scuffs in the finish, there is a large crack in the stock opposite side of the lock and personally I find the wood to metal fit very poor on the inlays, butt plate and lock. I find the carving poor and imprecise. Call me picky but for almost a $1,000 I would expect better overall workmanship and condition.
« Last Edit: March 03, 2013, 07:27:39 PM by Dean2 »