« previous next »
Pages: [1]   Go Down

Author Topic: Shot/ball bag spouts  (Read 5000 times)

Offline tallbear

  • Global Moderator
  • Hero Member
  • *
  • Posts: 4053
  • Mitch Yates
Shot/ball bag spouts
« on: May 21, 2013, 11:03:00 PM »
Spent a busy weekend at the lathe.Got half way done with a batch of Shot/ball bag spouts.They are based on originls in the book Getting The Lead Out by Karl Smith.Most are antler but a couple are wood.They range in size from shot to .60 cal.Hopefuly get the plugs done next week end then they will be off to Eric Fleisher for the leather work.

Mitch Yates
« Last Edit: May 21, 2013, 11:06:52 PM by aka tallbear »
Logged

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18392
  • AKA TimBuckII
Re: Shot/ball bag spouts
« Reply #1 on: May 22, 2013, 12:50:44 AM »
 Jeez Mitch, are we thinking in the same dimension or what? Great turning and file work, very nicely done.

  Tim C.
Logged

Offline G. Elsenbeck

  • Hero Member
  • *****
  • Posts: 1234
Re: Shot/ball bag spouts
« Reply #2 on: May 22, 2013, 12:56:06 AM »
I go along with Tim's comments, very good work Mitch. 
Gary
Logged
Journeyman in the Honourable Company of Horners (HCH) and a member in the Contemporary Longrifle Association (CLA)

There is a very fine line between "hobby" and "mental illness."

Offline tallbear

  • Global Moderator
  • Hero Member
  • *
  • Posts: 4053
  • Mitch Yates
Re: Shot/ball bag spouts
« Reply #3 on: May 22, 2013, 01:40:28 AM »
Thanks guys ;D Yea Tim I was suffering a bad case of "gunbuilders block" Cleaned the shop, then moved on to some tips. Now back to the guns. Turning is a nice change of pace.

Mitch
Logged

Offline B.Barker

  • Hero Member
  • *****
  • Posts: 1394
Re: Shot/ball bag spouts
« Reply #4 on: May 24, 2013, 03:22:47 PM »
Mitch, I really like those antler spouts. Very nice job.
Logged

Offline hanshi

  • Hero Member
  • *****
  • Posts: 5335
  • My passion is longrifles!
    • martialartsusa.com
Re: Shot/ball bag spouts
« Reply #5 on: May 24, 2013, 08:03:06 PM »
Very fine work.
Logged
!Jozai Senjo! "always present on the battlefield"
Young guys should hang out with old guys; old guys know stuff.

Offline tallbear

  • Global Moderator
  • Hero Member
  • *
  • Posts: 4053
  • Mitch Yates
Re: Shot/ball bag spouts
« Reply #6 on: May 30, 2013, 04:52:17 PM »
Finished the stoppers,ready to be sent to Eric Fleisher for the leatherwork!!!

Mitch Yates
Logged

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18392
  • AKA TimBuckII
Re: Shot/ball bag spouts
« Reply #7 on: May 30, 2013, 06:28:54 PM »
 Nice lathe work Mitch. Are the two on the right taper fit?

  Tim C.
Logged

Offline tallbear

  • Global Moderator
  • Hero Member
  • *
  • Posts: 4053
  • Mitch Yates
Re: Shot/ball bag spouts
« Reply #8 on: May 31, 2013, 04:01:29 PM »
Tim
Yes they are taper fit.I do my powder horn tips the same way.

Mitch
Logged

Offline Jeff Stewart

  • Jr. Member
  • **
  • Posts: 79
Re: Shot/ball bag spouts
« Reply #9 on: June 06, 2013, 03:17:50 AM »
Great.  Now I'll have to buy some more shot pouches.  Great work, Mitch.
Logged
Jeff
Pages: [1]   Go Up
« previous next »