« previous next »
Pages: [1]   Go Down

Author Topic: My new project.  (Read 10819 times)

doug.brayman

  • Guest
My new project.
« on: August 05, 2013, 02:07:44 PM »
Ok, so, I have not built anyting for about 12 years. I have been itching to have a flintlock pistol so, I decided to do a kit and save a little time. I chose the pistol kit from Jim Chambers. Here is where I'm at......















« Last Edit: August 05, 2013, 09:19:20 PM by doug.brayman »
Logged

Offline Ted Kramer

  • Sr. Member
  • ****
  • Posts: 282
Re: My new project.
« Reply #1 on: August 05, 2013, 04:38:58 PM »
Looking good. It should be a nice pistol. What caliber?
Logged

doug.brayman

  • Guest
Re: My new project.
« Reply #2 on: August 05, 2013, 05:02:14 PM »
Quote from: Ted Kramer on August 05, 2013, 04:38:58 PM
Looking good. It should be a nice pistol. What caliber?
It's a .45 cal
Logged

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19534
Re: My new project.
« Reply #3 on: August 05, 2013, 05:53:53 PM »
Looks like the trigger is inletted quite deep and that you could take wood off the underside from the trigger plate forward to the entry thimble.  What's that notch in the lock inletting?
Logged
Andover, Vermont

doug.brayman

  • Guest
Re: My new project.
« Reply #4 on: August 05, 2013, 06:07:28 PM »
Quote from: rich pierce on August 05, 2013, 05:53:53 PM
Looks like the trigger is inletted quite deep and that you could take wood off the underside from the trigger plate forward to the entry thimble.  What's that notch in the lock inletting?

There is much wood to remove all over the stock. The "notch" is clearance for the cock when it is the forward position.
Logged

Offline alyce-james

  • Hero Member
  • *****
  • Posts: 909
Re: My new project.
« Reply #5 on: August 05, 2013, 09:05:07 PM »
Doug; I'm enjoying your build however the last four pictures are missing. I would like to see more. Thanks for sharing, AJ.
Logged
"Candy is Dandy but Liquor is Quicker". by Poet Ogden Nash 1931.

doug.brayman

  • Guest
Re: My new project.
« Reply #6 on: August 05, 2013, 09:19:41 PM »
Quote from: alyce-james on August 05, 2013, 09:05:07 PM
Doug; I'm enjoying your build however the last four pictures are missing. I would like to see more. Thanks for sharing, AJ.

Fixed
Logged

Offline alyce-james

  • Hero Member
  • *****
  • Posts: 909
Re: My new project.
« Reply #7 on: August 06, 2013, 02:05:08 AM »
Sir; Thanks for the fixed pictures. AJ
Logged
"Candy is Dandy but Liquor is Quicker". by Poet Ogden Nash 1931.

doug.brayman

  • Guest
Re: My new project.
« Reply #8 on: August 06, 2013, 01:37:56 PM »
Ok, The but cap is the next part to inlet. This makes me nervous. Im not sure of the best way to proceed.



Logged

Offline cmac

  • Hero Member
  • *****
  • Posts: 695
Re: My new project.
« Reply #9 on: August 07, 2013, 02:33:55 AM »
I've done a few of these and they look harder than they actually are. Just lamp black and carve away the darkened areas. It takes some time but the end result is worth it
Logged

pushboater

  • Guest
Re: My new project.
« Reply #10 on: August 07, 2013, 05:26:08 AM »
Looks like a very nice kit that Jim is putting out, and so far it looks like you're well on your way to having one fine pistol. Thanks for the pics.

Capt. David
Logged

doug.brayman

  • Guest
Re: My new project.
« Reply #11 on: August 07, 2013, 02:29:47 PM »
Quote from: cmac on August 07, 2013, 02:33:55 AM
I've done a few of these and they look harder than they actually are. Just lamp black and carve away the darkened areas. It takes some time but the end result is worth it


Yeah, I just have to have some time and go for it.
Logged

doug.brayman

  • Guest
Re: My new project.
« Reply #12 on: August 07, 2013, 02:55:53 PM »
Quote from: pushboater on August 07, 2013, 05:26:08 AM
Looks like a very nice kit that Jim is putting out, and so far it looks like you're well on your way to having one fine pistol. Thanks for the pics.

Capt. David

Thanks, I'm trying.
Logged

doug.brayman

  • Guest
Re: My new project.
« Reply #13 on: August 12, 2013, 01:27:54 PM »
But cap on. Still have shaping to do on the grip of course. Yes, I will be using a different screw.





« Last Edit: August 12, 2013, 01:29:15 PM by doug.brayman »
Logged

Offline alyce-james

  • Hero Member
  • *****
  • Posts: 909
Re: My new project.
« Reply #14 on: August 12, 2013, 05:02:18 PM »
Good morning Sir; Nice job on the butt-cap. AJ.
Logged
"Candy is Dandy but Liquor is Quicker". by Poet Ogden Nash 1931.

doug.brayman

  • Guest
Re: My new project.
« Reply #15 on: August 13, 2013, 02:27:05 PM »
Quote from: alyce-james on August 12, 2013, 05:02:18 PM
Good morning Sir; Nice job on the butt-cap. AJ.

Thank you, I was worried about this part. I am satisfied with how it came out though.
Logged

doug.brayman

  • Guest
Re: My new project.
« Reply #16 on: August 20, 2013, 02:04:35 AM »
A  little more progress.....

[/URL][/img]















« Last Edit: August 20, 2013, 02:15:28 AM by doug.brayman »
Logged

doug.brayman

  • Guest
Re: My new project.
« Reply #17 on: August 28, 2013, 01:31:25 AM »
OK, Muzzle cap on. Still waiting for my trigger guard. Time for the forstock to go on a diet...













Logged

doug.brayman

  • Guest
Re: My new project.
« Reply #18 on: September 11, 2013, 01:32:48 PM »
Almost time for decorations... Looking slightly less ugly and more like the tool It was meant to be.











Logged

Offline Dr. Tim-Boone

  • Global Moderator
  • Hero Member
  • *
  • Posts: 6538
  • I Like this hat!!
Re: My new project.
« Reply #19 on: September 13, 2013, 10:00:16 PM »
A lot of nice careful work there!!
Logged
De Oppresso Liber
Marietta, GA

Liberty is the only thing you cannot have unless you are willing to give it to others. – William Allen White

Learning is not compulsory...........neither is survival! - W. Edwards Deming

doug.brayman

  • Guest
Re: My new project.
« Reply #20 on: September 20, 2013, 01:21:29 PM »
Thank you. More to come!
Logged

doug.brayman

  • Guest
Re: My new project.
« Reply #21 on: September 23, 2013, 01:39:17 PM »
Decoration in process with MUCH help from my good friend Jack. It's not finished, more detail will be added to the carving around the tang and a little more wire inlay work. I played around with rust bluing as well. I really like how fast the Dengler's Rust Blue works.








Logged

Online EricEwing

  • Hero Member
  • *****
  • Posts: 591
    • https://www.ericewingmaker.com/
Re: My new project.
« Reply #22 on: September 23, 2013, 03:25:45 PM »
Looks awesome! The rust blue looks real good especially on the pipes and you and Jack did a great job on the inlays and carvings. You'll be hitting bullseyes with that in no time!
Logged

doug.brayman

  • Guest
Re: My new project.
« Reply #23 on: September 23, 2013, 05:45:33 PM »
Thanks, the carving and wire inlay i had help with. The rest is all me.
Logged
Pages: [1]   Go Up
« previous next »