Author Topic: Need some ideas...  (Read 10161 times)

Offline Ezra

  • Hero Member
  • *****
  • Posts: 1579
Need some ideas...
« on: July 09, 2008, 11:50:11 PM »
I will have an Ed Rayl barrel soon with the following dimensions.

 - 44" length
 - 1 1/4" breech
 - 15/16" waist
 - 1 1/8" muzzle
 - .60 caliber
 
What should I make with it?  Must be a flintlock and pre-1800.  Thoughts?

Thanks.  :)


Ez
"Rules are for the obedience of fools and guidance of wise men"

northmn

  • Guest
Re: Need some ideas...
« Reply #1 on: July 10, 2008, 12:28:15 AM »
With that heavy of breech I would look at a Dickert Lancaster style that commonly used 2inch + wide buttplates that would kind of balance it out. 

DP

Offline AndyThomas

  • Sr. Member
  • ****
  • Posts: 344
Re: Need some ideas...
« Reply #2 on: July 10, 2008, 12:47:32 AM »
What about a John Schreit, the earliest dated longrifle, dated 1761.

This is one of my favorites. Always wanted to make one.

Your barrel would be perfect.

Andy
formerly the "barefoot gunsmith of Martin's Station" (now retired!)

www.historicmartinsstation.com

Evil Monkey

  • Guest
Re: Need some ideas...
« Reply #3 on: July 10, 2008, 12:48:48 AM »
Jeager.

lew wetzel

  • Guest
Re: Need some ideas...
« Reply #4 on: July 10, 2008, 01:27:30 AM »
would do something early 1750,transitional piece with a very wide butt and wood patch box.maybe done in silver.

Offline Z. Buck

  • Hero Member
  • *****
  • Posts: 654
  • Fabricati Diem Pvnc
Re: Need some ideas...
« Reply #5 on: July 10, 2008, 01:32:44 AM »
im with Cody, i think you could make a very nice long barreled jeager out of it, i am learning more and more that short barrels were i now way the rule for jeagers, plus if you are interested in that sorta thing it is very enlightening to do research for a continental gun a little bit different than our American guns
I Make Inflammatory Statements

Be Prepared

Offline Ezra

  • Hero Member
  • *****
  • Posts: 1579
Re: Need some ideas...
« Reply #6 on: July 10, 2008, 04:06:45 AM »
Do you guys think the barrel is too long for a Christian Springs style?


Ez
"Rules are for the obedience of fools and guidance of wise men"

Offline Ed Wenger

  • Global Moderator
  • Hero Member
  • *
  • Posts: 2457
Re: Need some ideas...
« Reply #7 on: July 10, 2008, 04:18:00 AM »
Ez...

Some might not agree, but that's exactly what I was going to suggest.  Early, like Lew and Andy suggested, kinda stocky but graceful due to the long barrel, and a step wrist.  Plus, a Christian Springs rifle can incorporate a lot of the architecture associated with some Jeagers.  What ya think??
Ed Wenger

Offline Dphariss

  • Hero Member
  • *****
  • Posts: 9920
  • Kill a Commie for your Mommy
Re: Need some ideas...
« Reply #8 on: July 10, 2008, 04:50:03 AM »
Pick one of the early rifles like the Schreit. There are a number of good candidates in RCA. I think 83/84?? In the front of RCA II would be a candidate as well.
I would shorten it to 42 from the muzzle but thats just me. Look at the muzzle of the Schreit and maybe the Marshal rifle IIRC. They were fairly small at the muzzle.
Dan
He who dares not offend cannot be honest. Thomas Paine

Offline B Shipman

  • Hero Member
  • *****
  • Posts: 1928
    • W.G. Shipman Gunmaker
Re: Need some ideas...
« Reply #9 on: July 10, 2008, 07:31:20 AM »
Any of the above. Whatever floats your boat.

Offline Elnathan

  • Hero Member
  • *****
  • Posts: 1773
Re: Need some ideas...
« Reply #10 on: July 10, 2008, 05:58:51 PM »
I like the idea of a long jaeger or a Christian Springs-type rifle, but another idea would be a musket-styled rifle similar to RCA 141.
A man can never have too much red wine, too many books, or too much ammunition -  Rudyard Kipling

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19516
Re: Need some ideas...
« Reply #11 on: July 10, 2008, 10:29:20 PM »
I love that musket-styled rifle.  If you send me an email I'll send you pix of a heavy early lehigh/Christians Springs rifle Shumway showed in Muzzle Blasts back in the 80's.  The original was a smoothie but it's quite a gun with terrific architecture, quite plain.
Andover, Vermont

Offline Tom Currie

  • Hero Member
  • *****
  • Posts: 1294
Re: Need some ideas...
« Reply #12 on: July 12, 2008, 02:14:49 AM »
Take a look at Eric Kettenburg's 1750 rifle on his website. I could see attempting something like that with a big barrel like you have.

don getz

  • Guest
Re: Need some ideas...
« Reply #13 on: July 12, 2008, 03:22:39 AM »
Wow...that's a big barrel.  Actually, most of those early guns don't have barrels that big, although you could use for that.
It's going to be a rather heavy gun...probably 9# to 10# when finished.....Don

Offline Ezra

  • Hero Member
  • *****
  • Posts: 1579
Re: Need some ideas...
« Reply #14 on: July 12, 2008, 05:29:22 AM »
While looking through my RCA Volume II I found #90 attributed to Shroyer.  It is a very early York County.  I am thinking that that might be a real possibility.

Also, is the below photo representative of the Haga "style"?




Ez
"Rules are for the obedience of fools and guidance of wise men"

Offline Ed Wenger

  • Global Moderator
  • Hero Member
  • *
  • Posts: 2457
Re: Need some ideas...
« Reply #15 on: July 12, 2008, 09:22:29 PM »
Ez...

York would work and yes, I'd say that's very "Hagaish".  Let us know what you decide.

Ed
Ed Wenger

halfmeasures

  • Guest
Re: Need some ideas...
« Reply #16 on: July 13, 2008, 12:42:37 AM »
Ezra-Here's your huckleberry-Yorkish,big barreled, and southern. Jim
http://www.americanhistoricservices.com/html/body_humble_rifle.html
« Last Edit: July 13, 2008, 12:49:16 AM by jim robeck »