Author Topic: Looking for possible tutorial in Scanton Pa 7-14,15,16-08  (Read 5427 times)

LURCHWV@BJS

  • Guest
Looking for possible tutorial in Scanton Pa 7-14,15,16-08
« on: July 13, 2008, 02:12:12 PM »
I will be in Scranton Moday, or at least traveling there to frac a well.  Hope to find a builder to get some hands on tutoring or just to meet. Will check website when I get there.


   Rich

   P.S.  I f anyone is on I-79, I-80 or I-81 and sees a big blue and white tractor trailer with a big engine on the trailer odds are one of them is me.

George F.

  • Guest
Re: Looking for possible tutorial in Scanton Pa 7-14,15,16-08
« Reply #1 on: July 13, 2008, 03:13:07 PM »
Is that for Natural Gas?  If your gonna be in that area on the weekend of Dixon's Fair, you would benefit greatly and by no means be sorry you went, It's  out I 78 / 22 west of Allentown,Pa  Exit at Krumsville, then right turn off ramp., through 4 way stop sign and about 2 miles until you see all the cars parked. They have seminars all weekend long, dealers, builders galour .  You'll love it

famouseagle

  • Guest
Re: Looking for possible tutorial in Scanton Pa 7-14,15,16-08
« Reply #2 on: July 13, 2008, 06:34:37 PM »
Dixon's Gunmakers' Fair doesn't start until 7/25.

billd

  • Guest
Re: Looking for possible tutorial in Scanton Pa 7-14,15,16-08
« Reply #3 on: July 13, 2008, 11:17:06 PM »
Hi Rich,    Your passing right by me. I'd ask you to stop and say hello, but I live on a small dead end road. No place to turn around.

There's a Goex distributor about 10 miles outside of Scranton.  $11.25 a can if you buy 25 cans, plus sales tax. Not much else up that way concerning flintlocks.

Bill,   exit 159, I-81

Offline Dale Halterman

  • Global Moderator
  • Hero Member
  • *
  • Posts: 2694
Re: Looking for possible tutorial in Scanton Pa 7-14,15,16-08
« Reply #4 on: July 13, 2008, 11:34:21 PM »
Dixon's is worth a visit even if it isn't the weekend of the fair.

Dale H

LURCHWV@BJS

  • Guest
Re: Looking for possible tutorial in Scanton Pa 7-14,15,16-08
« Reply #5 on: July 15, 2008, 05:51:08 AM »
Not so much in Scranton in a town called  Tunkhannockat a golf resort.  What is name of powder distributor?  Is worth checking out , I pay 18.95 a pound


    Rich

billd

  • Guest
Re: Looking for possible tutorial in Scanton Pa 7-14,15,16-08
« Reply #6 on: July 15, 2008, 06:14:56 AM »
You mean Tunkhannock. You must be at Shadow Brook.   The powder distributor happens to be closed this week for vacation. You about 30 miles west of them.  The river has some of the best smallmouth fishing on the east coast, good walleye and muskie too. Not much else to do there. Take Rt 6 north for some good sight seeing and indian history.

This guy is not too far north of you.  Maybe 25 or 30 miles.   No store, only custom work.    http://www.gobblerknoblongrifles.com/index.html

There's a club and range real close, but probably not much going on during the week.     http://www.f-s-c.org/


See you at Dixons,
Bill

LURCHWV@BJS

  • Guest
Re: Looking for possible tutorial in Scanton Pa 7-14,15,16-08
« Reply #7 on: July 17, 2008, 04:46:37 PM »
thanx for the info, home now, but will be spending more time n the future. can't make Dixon's VERY REGRETTABLY   


RICH