« previous next »
Pages: [1]   Go Down

Author Topic: Philly Horn #3 (Early)  (Read 6277 times)

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18388
  • AKA TimBuckII
Philly Horn #3 (Early)
« on: March 23, 2015, 07:12:28 PM »
 
  It is 14” around the outside curve and about 10 TTT. The Maple base, colored with AF, is about 3”, hollowed out about 3/4s. It is held in place by the same 4 Steel pins that hold the Band on. The Staple goes through and is twisted over inside. The tips itself is about 1 ¾”, threaded 5/8- 11. The collar is about 7/8”, a press fit held in place by the Staple. Color is AF/Dye and Shoe Polish.

  Tim C.








Logged

Offline EricEwing

  • Hero Member
  • *****
  • Posts: 591
    • https://www.ericewingmaker.com/
Re: Philly Horn #3 (Early)
« Reply #1 on: March 23, 2015, 07:20:29 PM »
Fantastic! I like this one alot
Logged

Offline skillman

  • Hero Member
  • *****
  • Posts: 996
  • The Usual Suspect
Re: Philly Horn #3 (Early)
« Reply #2 on: March 24, 2015, 04:53:38 AM »
Very good Tim.

Steve
Logged
Steve Skillman

Offline Cory Joe Stewart

  • Hero Member
  • *****
  • Posts: 1862
    • My etsy shop
Re: Philly Horn #3 (Early)
« Reply #3 on: March 24, 2015, 06:07:21 AM »
Tim,

I have liked all of the work you have done that I have seen.  But this is getting to the top.  The shape and proportions that you see on this are simple but not easy to achieve. 

Well done.

Coryjoe
Logged

Offline Frank Barker

  • Hero Member
  • *****
  • Posts: 575
Re: Philly Horn #3 (Early)
« Reply #4 on: March 28, 2015, 06:59:54 PM »
That's a beautiful horn there Tim. I feel your work is rapidly becoming collector grade. Thanks for showing us Hillbilly's what a really nice horn looks like.

Kind Regards
Frank Barker
Logged

Offline Tony N

  • Hero Member
  • *****
  • Posts: 646
  • Rabbit Hash,Ky
Re: Philly Horn #3 (Early)
« Reply #5 on: March 28, 2015, 09:20:42 PM »
Very Nice!!  Perfect color, I love it!

~Tony
Logged

Offline Kopfjaeger

  • Sr. Member
  • ****
  • Posts: 403
Re: Philly Horn #3 (Early)
« Reply #6 on: March 31, 2015, 02:22:42 PM »
Very nice.
Logged
" A godly man and his rifle deprive sleep from the wicked, A christian man who prays is the defeater of evil, A praying man who will fight is the conqueror of nations and the hope of the oppressed "

Offline B. Hey

  • Sr. Member
  • ****
  • Posts: 290
Re: Philly Horn #3 (Early)
« Reply #7 on: April 05, 2015, 11:13:48 PM »
Dang, Tim. Your work is amazing. Thanks so much for sharing and encouraging so many. Take care ... Bill
Logged

Offline crowbarforge

  • Full Member
  • ***
  • Posts: 113
Re: Philly Horn #3 (Early)
« Reply #8 on: April 08, 2015, 12:41:43 AM »
Color, shape and style all outstanding! I have got to get my bench cleared off while you guys are inspiring me!
Logged

Offline P.W.Berkuta

  • Hero Member
  • *****
  • Posts: 2213
Re: Philly Horn #3 (Early)
« Reply #9 on: April 08, 2015, 04:41:50 PM »
Very nice Tim ;)! Where do you guys get the odd pices to make the threaded collar and screw in tip. Are they always made out of horn or antler? I like to try to make one of these style of horns but not sure where to get the odd pieces to "play" with. I have imitation ivory (ivory macarta) and such that is used for knife handles can that be used?
Logged
"The person who says it cannot be done should not interrupt the person who is doing it." - Chinese proverb

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18388
  • AKA TimBuckII
Re: Philly Horn #3 (Early)
« Reply #10 on: April 08, 2015, 06:25:37 PM »
Quote from: P.W.Berkuta on April 08, 2015, 04:41:50 PM
Very nice Tim ;)! Where do you guys get the odd pices to make the threaded collar and screw in tip. Are they always made out of horn or antler? I like to try to make one of these style of horns but not sure where to get the odd pieces to "play" with. I have imitation ivory (ivory macarta) and such that is used for knife handles can that be used?

   I buy just the solid tips if I can ( looking for a good source now) Sometimes they are large enough to get a tip and a collar out of but most of the time it takes two tips, which may get two sets from, a collar and the screw tip. I have quite a few raw horns so at times I will just cut the pieces off a whole horn, the straighter the better. On Philly style horns you will probably not find horn and antler mixed, more likely both pieces will be horn. I would also stick with natural materials.
 The collar is not threaded on this style of horn, in some other styles they are, the collar in this case serves to strengthen the threaded area.
 This may help you see it better:

  http://americanlongrifles.org/forum/index.php?topic=13901.msg130825#msg130825

  Tim C.
« Last Edit: April 08, 2015, 06:28:42 PM by Tim Crosby »
Logged

Horner75

  • Guest
Re: Philly Horn #3 (Early)
« Reply #11 on: April 08, 2015, 09:29:38 PM »
Tim, You just keep moving that bar up and I think that you Mastered this type of powder horn style for sure!  Great horn!

Rick
Logged
Pages: [1]   Go Up
« previous next »