« previous next »
Pages: [1]   Go Down

Author Topic: Jewlers saw  (Read 2305 times)

Offline WKevinD

  • Hero Member
  • *****
  • Posts: 1428
Jewlers saw
« on: May 07, 2015, 05:28:56 PM »
I just finished cutting out a patch-box with a number of piercings (Medbery-NY). I usually make my drawing cut it out and glue it to the brass with Elmers for a template.
This time I heated the brass, rubbed it with beeswax and used it for the glue. It held the drawing/template and the friction of the blade softened the residual wax and lubricated the blade, smoothest cuts ever. I only used two blades for perimeter and six piercings!
Logged
PEACE is that glorious moment in history when everyone stands around reloading.  Thomas Jefferson

Offline P.W.Berkuta

  • Hero Member
  • *****
  • Posts: 2213
Re: Jewlers saw
« Reply #1 on: May 07, 2015, 06:26:41 PM »
Very good idea - I have a patchbox to do today and I will use your suggestion ;)
Logged
"The person who says it cannot be done should not interrupt the person who is doing it." - Chinese proverb

Offline David Rase

  • Hero Member
  • *****
  • Posts: 4320
  • If we need it here, make it here. Charlie Daniels
Re: Jewlers saw
« Reply #2 on: May 07, 2015, 06:45:01 PM »
I will remember your tip the next time I use my jeweler's saw.  Great idea.
David
Logged

Offline smylee grouch

  • Hero Member
  • *****
  • Posts: 7907
Re: Jewlers saw
« Reply #3 on: May 07, 2015, 06:59:28 PM »
Thanks for sharing Burnt, sounds like a good idea.
Logged

Offline Robby

  • Hero Member
  • *****
  • Posts: 2655
  • NYSSR ―
Re: Jewlers saw
« Reply #4 on: May 08, 2015, 12:14:14 AM »
Thanks Burnt, making note!
Robby
Logged
molon labe
We the people are the rightful masters of both Congress and the courts, not to overthrow the Constitution but to overthrow the men who pervert the Constitution. A. Lincoln
Pages: [1]   Go Up
« previous next »