« previous next »
Pages: 1 [2]   Go Down

Author Topic: nose cap  (Read 10846 times)

Offline JTR

  • member 2
  • Hero Member
  • ****
  • Posts: 4351
Re: nose cap
« Reply #25 on: July 10, 2015, 07:07:13 PM »
Quote from: JCKelly on July 10, 2015, 02:36:40 AM

Please do no use aluminum.

Well, given that Rob's choices were between aluminum or stainless steel, at least aluminum was used on some percussion rifles as inlays. So it at least has precedence of use on the guns, where as stainless steel has none.

John
« Last Edit: July 11, 2015, 01:27:37 AM by JTR »
Logged
John Robbins

Offline JBJ

  • Hero Member
  • *****
  • Posts: 644
Re: nose cap
« Reply #26 on: July 11, 2015, 12:07:20 AM »
It really does not take that much material to pour a nose cap and to pour one is easier than you think (plenty of good info on this forum).  Check the salvage yards for old beer coils as they are tin and it pours nicely. One old Bitannia mug from the flea market will more than do the job.
J.B.
Logged

Offline Pete G.

  • Hero Member
  • *****
  • Posts: 2013
Re: nose cap
« Reply #27 on: July 11, 2015, 02:44:55 PM »
Every Lehman I ever saw (not many, admittedly) had a short brass cap, but I don't recall ever seeing one of cast pewter.
Logged

Rob

  • Guest
Re: nose cap
« Reply #28 on: July 12, 2015, 01:05:06 AM »
Thanks again guys  and JTR in particular  ,I have a steel butt plate and trigger guard and thinking about it  I will go with the brass nose cap but will that look ok with steel thimbles The gun i am building is a flint half stock from the ground up lock stock and barrel
Logged
Pages: 1 [2]   Go Up
« previous next »