Author Topic: Unknown Maker  (Read 2711 times)

Offline nord

  • Hero Member
  • *****
  • Posts: 1548
Unknown Maker
« on: December 22, 2015, 04:05:20 PM »
Comments & Opinions would be appreciated.

From the owner... " I did some cleaning on them. They all came from the same place. The brass was so black and corroded that I did not know they were engraved. The wood was black and covered with bird @#$%/!!. I scrubbed lightly and used a little oooo steel wool where needed. They are not refinished, just a little linseed oil added. I forgot to mention that the PB on the York Co. looking one opens by pushing on the middle of the toe plate."

Barrel- 42in.  .465cal. rifled with 7 grooves, good bore.
            Tapered .970in. to .931in.
LOP 13 1/8in.
OAL- 56in.
Lock- Percussion dated 1849 on hammer.
Trigger- DST double action. Fires set or unset.
Butt- 1.399in. x 4.097in.
Writing under barrel as pictured.
























« Last Edit: December 23, 2015, 03:32:22 PM by nord »
In Memory of Lt. Catherine Hauptman Miller 6/1/21 - 10/1/00 & Capt. Raymond A. Miller 12/26/13 - 5/15/03...  They served proudly.

Offline Molly

  • Hero Member
  • *****
  • Posts: 1506
Re: Unknown Maker
« Reply #1 on: December 22, 2015, 05:36:48 PM »
No idea but it looks nice in the photos.  Might the wood and metal have seen the hands of a "cleaner upper" at work? 

Offline louieparker

  • Hero Member
  • *****
  • Posts: 831
Re: Unknown Maker
« Reply #2 on: December 22, 2015, 07:47:37 PM »
Nord
When I look at this rifle I wonder if it started its life with this stock ?   Louie















 


Offline nord

  • Hero Member
  • *****
  • Posts: 1548
Re: Unknown Maker
« Reply #3 on: December 23, 2015, 12:46:24 AM »
Louie,

And that's exactly why the owner is asking for comments. Thank you and Merry Christmas.
In Memory of Lt. Catherine Hauptman Miller 6/1/21 - 10/1/00 & Capt. Raymond A. Miller 12/26/13 - 5/15/03...  They served proudly.