Author Topic: Sheet Silver Gauge?  (Read 2104 times)

Offline Shreckmeister

  • Hero Member
  • *****
  • Posts: 3808
  • GGGG Grandpa Schrecengost Gunsmith/Miller
Sheet Silver Gauge?
« on: January 20, 2016, 07:46:18 PM »
What gauge of sheet sterling silver works best for inlaying a cheekpiece?
Rightful liberty is unobstructed action according to our will within limits drawn around us by the equal rights of others. I do not add 'within the limits of the law' because law is often but the tyrant's will, and always so when it violates the rights of the individual.

Offline Mark Elliott

  • Hero Member
  • *****
  • Posts: 5191
    • Mark Elliott  Artist & Craftsman
Re: Sheet Silver Gauge?
« Reply #1 on: January 20, 2016, 11:44:10 PM »
I use 20ga.

Offline bama

  • Hero Member
  • *****
  • Posts: 2174
    • Calvary Longrifles
Re: Sheet Silver Gauge?
« Reply #2 on: January 21, 2016, 09:56:09 PM »
I agree with Mark, 20 gauge works well. When you buy it make sure to get it dead soft, it will be easier to work with. Like brass silver will work harden and need to be anealed but for simple inlays this will work well without anealing.
Jim Parker

"An Honest Man is worth his weight in Gold"

Offline flehto

  • Hero Member
  • *****
  • Posts: 3335
Re: Sheet Silver Gauge?
« Reply #3 on: January 22, 2016, 03:32:13 AM »
Many years ago I bought a large sheet of sterling silver that miked .064 and have used it for many cheek piece stars and still have a lot of the sheet left. This thickness works well for a star in that the corners don't protrude as w/ thinner stock and a lot remains after filing down the profile. This thicker silver enables 1 center screw to be used.....Fred

 
« Last Edit: January 22, 2016, 05:10:12 PM by flehto »