« previous next »
Pages: [1]   Go Down

Author Topic: Hawken-ish Pistol  (Read 4914 times)

Offline smallpatch

  • Hero Member
  • *****
  • Posts: 4107
  • Dane Lund
Hawken-ish Pistol
« on: April 29, 2016, 09:35:25 PM »
10", .54 cal Green Mt Barrel, nice piece of maple, Davis lock, TOW set trigger.
All hand scraped, no sandpaper.   Ferric nitrate, ebony toner, Chambers oil finish.
Really difficult piece of maple.  But really pretty.






« Last Edit: April 29, 2016, 09:42:08 PM by smallpatch »
Logged
In His grip,

Dane

greybeard

  • Guest
Re: Hawken-ish Pistol
« Reply #1 on: April 29, 2016, 11:03:21 PM »
Very nice indeed!
     Bob
Logged

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: Hawken-ish Pistol
« Reply #2 on: April 29, 2016, 11:17:48 PM »
Definatelty not a Hawkins..... ;) Nice job. I have always found pistols difficult to work on.
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

thimble rig

  • Guest
Re: Hawken-ish Pistol
« Reply #3 on: April 29, 2016, 11:27:46 PM »
Outstanding.You did good on the finish.That wood is beautiful
Logged

Offline moleeyes36

  • Hero Member
  • *****
  • Posts: 1443
Re: Hawken-ish Pistol
« Reply #4 on: April 29, 2016, 11:58:02 PM »
Dane,

I'm usually not much of a fan of percussion guns of any sort, but your pistol is an exception.  Well made and the full stock really shows off the wood.  Great looking gun!

Mole Eyes
Logged
Don Richards
NMLRA Field Rep, Instructor, Field Range Officer
NRA Chief Range Safety Officer

Online rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19538
Re: Hawken-ish Pistol
« Reply #5 on: April 30, 2016, 01:59:40 AM »
Dane, looks great. Real clean.
Logged
Andover, Vermont

Offline B.Habermehl

  • Hero Member
  • *****
  • Posts: 1690
Re: Hawken-ish Pistol
« Reply #6 on: April 30, 2016, 01:44:07 PM »
Nice neat work. Pistols are the most demanding guns to build. Every thing is in your hands when it's done. The are absolutely unforgiving of oopsies of any sort. Nice gun. BJH
Logged
BJH

Offline Old Ford2

  • Hero Member
  • *****
  • Posts: 1102
Re: Hawken-ish Pistol
« Reply #7 on: April 30, 2016, 01:52:38 PM »
I'd be some proud to have that fine pistol tucked in my sash!
Very fine looking pistol!
Fred
Logged
Never surrender, always take a few with you.
Let the Lord pick the good from the bad!

Online Bob Roller

  • Hero Member
  • *****
  • Posts: 9691
Re: Hawken-ish Pistol
« Reply #8 on: April 30, 2016, 02:47:52 PM »
Quote from: BJH on April 30, 2016, 01:44:07 PM
Nice neat work. Pistols are the most demanding guns to build. Every thing is in your hands when it's done. The are absolutely unforgiving of oopsies of any sort. Nice gun. BJH

Over a period of time I made and sent about 125 Bailes style flintlocks to Helmut Mohr in
Mayen/Hausen,Germany for his nice Boutet style pistols.He told me,without hesitation that
pistols are a real booger to make,even plain ones and the Boutet was NOT plain.
I have made 3 pistols and want to make no more.

Bob Roller
Logged

Offline bama

  • Hero Member
  • *****
  • Posts: 2174
    • Calvary Longrifles
Re: Hawken-ish Pistol
« Reply #9 on: April 30, 2016, 04:33:22 PM »
That is a very nice job on that pistol and in 54 cal it is going to be a magnum to shoot but I bet it will be fun.  ;D Thanks for sharing it with us.
Logged
Jim Parker

"An Honest Man is worth his weight in Gold"

Offline PPatch

  • Hero Member
  • *****
  • Posts: 2456
Re: Hawken-ish Pistol
« Reply #10 on: April 30, 2016, 05:05:13 PM »
Love the architecture and clean lines of this pistol Dane, you nailed it. fine work all the way round.

dave
Logged
Dave Parks   /   Quis custodiet ipsos custodes?

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15839
Re: Hawken-ish Pistol
« Reply #11 on: April 30, 2016, 05:45:03 PM »
That looks like a fine pistol- probably quite accurate as well.
Logged
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline smallpatch

  • Hero Member
  • *****
  • Posts: 4107
  • Dane Lund
Re: Hawken-ish Pistol
« Reply #12 on: April 30, 2016, 06:19:19 PM »
Thanks all.
Mike, i couldn't agree more.  I've been working on this one off and on for about 5 years. They are a PITA to work on.  Kept putting it aside for other projects.  I don't think most people realize how hard pistols are to work on.  Nearly the same amount of work as a rifle, but in a very small space, that is very hard to hold.
Logged
In His grip,

Dane

Offline Marcruger

  • Hero Member
  • *****
  • Posts: 3702
Re: Hawken-ish Pistol
« Reply #13 on: May 01, 2016, 01:33:41 AM »
That's a fine looking pistol.  You started with a good looking piece of maple (even if it is a booger to work with), and did a great job with the color and finish.  I like it!   :-)  Marc
Logged
Pages: [1]   Go Up
« previous next »