It is about 13" around the outside curve, 11" across, tip to Butt. The Walnut Butt is about
2 1/2", hollowed out about 3/4s through, it is held in place by 3 pins that also hold the band. A twisted loop of wire goes through and is bent over on the inside, the staple at the neck is also bent over to hold it and the collar in place. The tip and collar are horn the tip and horn are threaded 5/8-11 NC.
The color is AF with Brown dye. The horn was scraped and after color there were some strange splotches on it, I thought they were oil spots. So I scrapped everything of and colored it again only to have the spots return. Just goes to show that not only each horn takes color differently but each horn may have unique areas on it.
Tim C.
