« previous next »
Pages: [1]   Go Down

Author Topic: Need direction  (Read 1499 times)

Offline sdilts

  • Sr. Member
  • ****
  • Posts: 431
Need direction
« on: April 05, 2020, 03:01:27 AM »
A guy brought me a 38" octagon to round barrel and Rice's new Nock lock. He said to make him something out of them that would be an appropriate use of the parts. Trouble is, I don't have a clue as to what would be appropriate. I don't want to just slap a bunch of parts together and call it a rifle. In the books I have, I haven't been able to find anything showing the Nock lock that I could go by. Even searching the internet hasn't helped. So, I'm scratching my head. I'm hoping someone can point me in the right direction.
Logged

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19534
Re: Need direction
« Reply #1 on: April 05, 2020, 05:55:19 AM »
Logged
Andover, Vermont

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15837
Re: Need direction
« Reply #2 on: April 05, 2020, 06:21:27 AM »
Yes - good idea, Rich.  That kinda looks like the centre rifle here, except for the length of the checkering on the wrist
and of course, the two barrel keys.


Logged
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline sdilts

  • Sr. Member
  • ****
  • Posts: 431
Re: Need direction
« Reply #3 on: April 06, 2020, 03:00:10 AM »
Thanks guys. I really appreciate your input. I talked to the guy and he would really like a fullstock. Do you think #3 in Daryl's post would work?

Steve
Logged

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15837
Re: Need direction
« Reply #4 on: April 06, 2020, 03:37:50 AM »
Absolutely. It would be very similar to Chamber's mid 1700's Englishman Gentleman's rifle.
Check it out, second from the bottom of this page.
https://www.flintlocks.com/new/rifles.html#RK-12
 
« Last Edit: April 06, 2020, 03:41:43 AM by Daryl »
Logged
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: Need direction
« Reply #5 on: April 06, 2020, 02:40:19 PM »
Look at the Sheetz and Lauck guns and all the guns of WV and VA after 1800
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline sdilts

  • Sr. Member
  • ****
  • Posts: 431
Re: Need direction
« Reply #6 on: April 06, 2020, 04:24:10 PM »
This sure gives me something to work with. Living on the border of VA/WV, I think I'll investigate those a bit.
Logged

Online Pukka Bundook

  • Hero Member
  • *****
  • Posts: 3472
Re: Need direction
« Reply #7 on: April 06, 2020, 05:33:27 PM »
The Chamber's style is a bit too early for a Nock lock, but still a nice rifle.
Logged

Offline Justin Urbantas

  • Hero Member
  • *****
  • Posts: 1395
Re: Need direction
« Reply #8 on: April 06, 2020, 06:08:04 PM »

I think a shotgun like this would be nice.
http://www.sitemason.com/page/ceZ2q4
Logged

Offline Not English

  • Hero Member
  • *****
  • Posts: 594
Re: Need direction
« Reply #9 on: April 07, 2020, 04:34:16 AM »
I'd do an English half stock with a soldered rib. Maybe a fowler trigger guard, but a simple trigger guard  with a simple spur coming of the trigger guard behind the bow. A pewter fore stock cap would be in order. This would put it the first half of the 19th century maybe the last quarter of the 18th century. Think along the slim and trim lines. At this point in time the English were leading the development of the flintlock.

Dave
Logged
Pages: [1]   Go Up
« previous next »