« previous next »
Pages: [1]   Go Down

Author Topic: Ohio half stock  (Read 4719 times)

Offline rennikselum

  • Full Member
  • ***
  • Posts: 101
  • Jeff Rogers
Ohio half stock
« on: July 10, 2016, 01:26:50 AM »
A few years ago I shared an original Ohio half stock I picked up at an auction. Here is a piece I built with the same "flavor" of the era and location. The gun is built with German silver hardware, Rice .50 cal 7/8ths" barrel, and a locally harvested maple plank. Being from Ohio, figured this would be appropriate.

Welcome all critical comments.

Jeff























« Last Edit: July 10, 2016, 01:30:21 AM by rennikselum »
Logged

Offline wattlebuster

  • Hero Member
  • *****
  • Posts: 2088
Re: Ohio half stock
« Reply #1 on: July 10, 2016, 01:29:33 AM »
Fine job on that fine curled rifle ;D
Logged
Nothing beats the feel of a handmade southern iron mounted flintlock on a cold frosty morning

Offline Glenn

  • Hero Member
  • *****
  • Posts: 507
Re: Ohio half stock
« Reply #2 on: July 10, 2016, 01:32:22 AM »
Outstanding job indeed.  I love this style of half-stock with silver hardware on maple.  Beautiful finish on the wood too.   ;D ;D
Logged
Many of them cried; "Me no Alamo - Me no Goliad", and for most of them these were the last words they spoke.

Offline P.W.Berkuta

  • Hero Member
  • *****
  • Posts: 2215
Re: Ohio half stock
« Reply #3 on: July 10, 2016, 01:34:19 AM »
"A few years ago I shared an original Ohio half stock I picked up at an auction. Here is a piece I built with the same "flavor" of the era and location. The gun is built with German silver hardware, Rice .50 cal 7/8ths" barrel, and a locally harvested maple plank. Being from Ohio, figured this would be appropriate.

Welcome all critical comments.

Jeff"
I like your's better than the qriginal --- ;D ;D ;). You did a fine job!
Logged
"The person who says it cannot be done should not interrupt the person who is doing it." - Chinese proverb

thimble rig

  • Guest
Re: Ohio half stock
« Reply #4 on: July 10, 2016, 02:24:47 AM »
Beautiful rifles.You did a good job.How does she shoot?
Logged

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19540
Re: Ohio half stock
« Reply #5 on: July 10, 2016, 02:26:06 AM »
Nice clean looking gun.  I like it!
Logged
Andover, Vermont

Offline Mauser06

  • Hero Member
  • *****
  • Posts: 932
Re: Ohio half stock
« Reply #6 on: July 10, 2016, 06:43:43 AM »
great looking rifle!   



and....i learned a lot from your pics...as i just finished my first rifle...a half stock as well....someone mentioned i could have removed a bit more wood off the butt...i had no idea where that was possible...my stock is shaped as many modern gun stocks are...


your pics show exactly what was meant....i took off a little but not enough and could have went farther back with it....i gotta remember its not a modern gun stock...


so, thanx for sharing!   im gunna save a few pics if you dont mind!
Logged

Offline Curtis

  • Hero Member
  • *****
  • Posts: 2338
  • Missouri
Re: Ohio half stock
« Reply #7 on: July 10, 2016, 05:34:58 PM »
Now that look right purty!  You did a great job, as others have said, nice clean lines!  I am gathering the parts to build an Ohio style rifle for my son, may do something similar.  Did you pour a pewter cap for that? Can't tell for certain from the pics.

Curtis
Logged
Curtis Allinson
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Sometimes, late at night when I am alone in the inner sanctum of my workshop and no one else can see, I sand things using only my fingers for backing

Offline smokinbuck

  • Hero Member
  • *****
  • Posts: 3005
Re: Ohio half stock
« Reply #8 on: July 10, 2016, 06:11:51 PM »
Jeff,
Very nice  job. You have picked up a lot of the attributes of the Vincent rifles out of Washington county. The original is definitely not by Vincent, do you know who built it?
Mark
Logged
Mark

Offline rennikselum

  • Full Member
  • ***
  • Posts: 101
  • Jeff Rogers
Re: Ohio half stock
« Reply #9 on: July 11, 2016, 02:36:41 AM »
I had the Vincent style in mind while building, just without the pointed bicep mounted buttplate. I liked the fit of the original piece as far as drop and trigger guard. The nose cap is from a sheet of german silver with the front soldered on.

Not sure who build the back action piece. I'm guessing that the barrel was re-purposed from another gun. There are shallow unused dovetails cut out under the stock on the bottom flats of the barrel.



Jeff
Logged

Offline SingleMalt

  • Hero Member
  • *****
  • Posts: 613
  • One day I'll be considered a good builder.
Re: Ohio half stock
« Reply #10 on: July 11, 2016, 05:33:10 AM »
I like it!  It wasn't uncommon to reuse an otherwise good barrel.  Who knows how old it is?
Logged
Never drink whisky that isn't old enough to vote.

"The penalty good men pay for indifference to public affairs is to be ruled by evil men."- Plato

"The Constitution shall never be construed to prevent the people of the United States who are peaceable citizens from keeping their own arms."

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: Ohio half stock
« Reply #11 on: July 11, 2016, 03:32:17 PM »
All though I don't see any similarities to the original I really like the gun you built, very well done and "Ohio-ish".
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?
Pages: [1]   Go Up
« previous next »