Author Topic: Pistol ID  (Read 6691 times)

2nocks

  • Guest
Pistol ID
« on: November 29, 2016, 12:34:17 AM »
Hi All,

I'm new to the forum.  I'm posting some pictures of a pistol that was given to my father in the 1960's. It was found during an excavation project in NYC.  Can anyone help with identification of the gun such as the make and it's approximate age? I believe the first photo may be some sort of branding or maybe the makers ID, although I did not get a great pic.  Thank you.














2nocks

  • Guest
Re: Pistol ID
« Reply #1 on: November 29, 2016, 12:42:09 AM »
one more picture.


Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: Pistol ID
« Reply #2 on: November 29, 2016, 03:08:15 PM »
I don't believe that gun was ever underground. It looks to be built for the Mid Eastern trade. More than likely post 1800.
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline conquerordie

  • Hero Member
  • *****
  • Posts: 528
Re: Pistol ID
« Reply #3 on: November 29, 2016, 04:05:07 PM »
Mike's right that the pistol was never in the ground. Maybe found in a wall or foundation, but not excavated. Can you get better pics of the stamps on the barrel. That might help. Thanks,
Greg

Big Wolf

  • Guest
Re: Pistol ID
« Reply #4 on: November 29, 2016, 04:26:26 PM »
I agree that it was made for the middle eastern trade, but that tang carving is much better than you normally see on most stuff from that region.

Offline smart dog

  • Global Moderator
  • Hero Member
  • *
  • Posts: 6992
Re: Pistol ID
« Reply #5 on: November 29, 2016, 05:21:44 PM »
Hi,
Excavation may not mean archaeological.  The gun could have been discovered during the excavation of an old foundation or building during construction of a new building and the gun found in a wall or nook.  I also would not jump to the conclusion that it is for middle eastern trade.  However, I have no idea who or what the proof or maker's mark on the barrel indicates.

dave
"The main accomplishment of modern economics is to make astrology look good."

Offline Bob Roller

  • Hero Member
  • *****
  • Posts: 9662
Re: Pistol ID
« Reply #6 on: November 29, 2016, 05:41:05 PM »
If soaked on Kroil long enough,that lock might work again.
This was no ornament,it was a serious one shot pistol and
the ornamentation was part of the making of it.
I also think it was found in a wall and not dug up from the ground.
Bob Roller

2nocks

  • Guest
Re: Pistol ID
« Reply #7 on: November 29, 2016, 05:45:49 PM »
Thanks guys. Keep em coming.  I'll try to get some better pics of the markings.

Bob the lock works, trigger pull is actually pretty nice on it as is.

Gun was found in tact too, my dad brought it to school as a kid and broke the stock. My brother and I finished the job on the stock knocking off the fireplace dozens of times.

Offline JTR

  • member 2
  • Hero Member
  • ****
  • Posts: 4341
Re: Pistol ID
« Reply #8 on: November 29, 2016, 06:18:54 PM »
It's a shame to see it in two pieces like that.
Why haven't you, or someone, glued it back together?

John
John Robbins

Offline PPatch

  • Hero Member
  • *****
  • Posts: 2456
Re: Pistol ID
« Reply #9 on: November 29, 2016, 06:24:39 PM »
Thanks guys. Keep em coming.  I'll try to get some better pics of the markings.

Bob the lock works, trigger pull is actually pretty nice on it as is.

Gun was found in tact too, my dad brought it to school as a kid and broke the stock. My brother and I finished the job on the stock knocking off the fireplace dozens of times.

The broken stock break can be restored, but some knowledge of how to would be required. It isn't one of those take it out in your shop and slop some glue on it deals.

Nice pistol, and pretty well made judging by the stock carving.

dave
Dave Parks   /   Quis custodiet ipsos custodes?

Offline smart dog

  • Global Moderator
  • Hero Member
  • *
  • Posts: 6992
Re: Pistol ID
« Reply #10 on: November 29, 2016, 06:56:22 PM »
Hi,
There appears to be some markings on the lock plate.  A little oil might help clear them up.

dave
"The main accomplishment of modern economics is to make astrology look good."

Offline conquerordie

  • Hero Member
  • *****
  • Posts: 528
Re: Pistol ID
« Reply #11 on: November 29, 2016, 06:59:52 PM »
To me the barrel ( octagon the whole length)
, the relief work on the barrel, and the carving would make it a nicer than average pistol. Very nice carving around the tang, but almost gaudy buttcap and Side plate that although fancy, doesn't look overly finished or polished.
Greg

Offline Seth Isaacson

  • Library_mod
  • Hero Member
  • *
  • Posts: 1097
  • Send me your rifles for the ALR Library!
    • Black Powder Historian
Re: Pistol ID
« Reply #12 on: November 29, 2016, 08:14:14 PM »
The deep "engraving" and raised carving are pretty common on pistols from areas once controlled by the Ottomans (most of the areas around the Mediterranean). The stock carving is in better shape than most examples but is not really any better quality overall than is regularly seen. These pistols aren't generally worth much in part due to their usually poor condition and also due to the large numbers of phony guns coming back from Iraq and Afghanistan, but the connection to your family certainly makes it an interesting heirloom. I'd see if you could get it fixed and then place it in a shadow box up on the wall.

Edit: Here is an intact example:
http://www.ima-usa.com/original-british-flintlock-pistol-for-turkish-market-circa-1820.html
« Last Edit: November 29, 2016, 08:25:43 PM by The Rambling Historian »
I am the Lead Historian/Firearms Specialist at Rock Island Auction Co., but I am here out of my own personal interests in muzzle loading and history.
*All opinions expressed are mine alone and are NOT meant to represent those of any other entity unless otherwise expressly stated.*

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: Pistol ID
« Reply #13 on: November 30, 2016, 01:17:31 AM »
The deep "engraving" and raised carving are pretty common on pistols from areas once controlled by the Ottomans (most of the areas around the Mediterranean). The stock carving is in better shape than most examples but is not really any better quality overall than is regularly seen. These pistols aren't generally worth much in part due to their usually poor condition and also due to the large numbers of phony guns coming back from Iraq and Afghanistan, but the connection to your family certainly makes it an interesting heirloom. I'd see if you could get it fixed and then place it in a shadow box up on the wall.

Edit: Here is an intact example:
http://www.ima-usa.com/original-british-flintlock-pistol-for-turkish-market-circa-1820.html

You got it. You should ID this kind of stuff for a living or something, you're pretty good at it.... ;)
« Last Edit: November 30, 2016, 06:48:18 AM by Ky-Flinter »
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline smart dog

  • Global Moderator
  • Hero Member
  • *
  • Posts: 6992
Re: Pistol ID
« Reply #14 on: November 30, 2016, 03:06:23 PM »
HI RH,
That seems like a pretty good match.  Did they usually forego proof marks on the barrels?

dave
"The main accomplishment of modern economics is to make astrology look good."

Offline Seth Isaacson

  • Library_mod
  • Hero Member
  • *
  • Posts: 1097
  • Send me your rifles for the ALR Library!
    • Black Powder Historian
Re: Pistol ID
« Reply #15 on: November 30, 2016, 05:28:58 PM »
Thanks Mike.  ;)

Dave, it depends on where it was actually made. Many continental European firearms were never proofed because there were no legal requirement to do so and often no official proof houses to do the testing nearby. Some of those that were also have the proofs concealed on the bottom of the barrels.
I am the Lead Historian/Firearms Specialist at Rock Island Auction Co., but I am here out of my own personal interests in muzzle loading and history.
*All opinions expressed are mine alone and are NOT meant to represent those of any other entity unless otherwise expressly stated.*

2nocks

  • Guest
Re: Pistol ID
« Reply #16 on: December 01, 2016, 12:05:00 AM »
Thanks everyone! appreciate all the help!