« previous next »
Pages: [1]   Go Down

Author Topic: Custom barrel makers?  (Read 3328 times)

Dave Patterson

  • Guest
Custom barrel makers?
« on: November 14, 2016, 01:36:07 AM »
This has most likely been covered a number of times, and if so, I apologize, but I'm just not adept with "search" functions.

The Bride has decreed I'm to build her a (roughly) 3/4-scale squirrel rifle for her anniversary/birthday present next August.

So, I'm looking for a 30", swamped (think, A-profile) round-ball barrel in .32 caliber.

Any suggestions of where I should look, or who to talk to about such a critter?

Thank you, in advance...

Logged

Offline James

  • Hero Member
  • *****
  • Posts: 627
Re: Custom barrel makers?
« Reply #1 on: November 14, 2016, 01:38:57 AM »
Charles Burton of FCI barrels is likely the only one who could make you a barrel to meet that deadline.  There are other very good barrel makers, but with a much longer  wait.
Logged
"Guard with jealous attention the public liberty. Suspect everyone who approaches that jewel. Unfortunately, nothing will preserve it but downright force. Whenever you give up that force, you are ruined... The great object is that every man be armed. Everyone who is able might have a gun." P.Henry

Offline Bill-52

  • Sr. Member
  • ****
  • Posts: 373
Re: Custom barrel makers?
« Reply #2 on: November 14, 2016, 02:09:32 AM »
Dave,

I heartedly endorse Charles Burton.  I'm working with one of his OTR smoothbores right now -- a great barrel. And it was delivered on time as promised.

Bill
Logged

Offline PPatch

  • Hero Member
  • *****
  • Posts: 2456
Re: Custom barrel makers?
« Reply #3 on: November 14, 2016, 02:14:09 AM »
Try The Gun Works - Oregon Barrel Co. 541-741-4118. See what they have or might make. Also Tip Curtis is worth a try, he usually stocks a lot of barrels - I don't have his number handy.

Here's a thought; Instead of a swamped perhaps go with a straight tapered barrel, you could cut it to your required length, or order it at 30 inches.

dave
Logged
Dave Parks   /   Quis custodiet ipsos custodes?

Offline James

  • Hero Member
  • *****
  • Posts: 627
Re: Custom barrel makers?
« Reply #4 on: November 14, 2016, 02:14:52 AM »
Because I didn't word my reply better,  I'll try to be more clear-  I have a couple of FCI barrels and they are great barrels.  I'm just saying that the time frame mentioned in the original post is likely too short to get one elsewhere
Logged
"Guard with jealous attention the public liberty. Suspect everyone who approaches that jewel. Unfortunately, nothing will preserve it but downright force. Whenever you give up that force, you are ruined... The great object is that every man be armed. Everyone who is able might have a gun." P.Henry

Offline BOB HILL

  • Hero Member
  • *****
  • Posts: 2284
Re: Custom barrel makers?
« Reply #5 on: November 14, 2016, 09:25:22 AM »
Rice makes a barrel that Jim Chambers uses with his boy's rifle kit. Jason may have one in stock. I would try them first. It comes in .32 A weight 34''....... Bob
Logged
South Carolina Lowcountry

Turtle

  • Guest
Re: Custom barrel makers?
« Reply #6 on: November 14, 2016, 04:12:25 PM »
 If you don't find a swamper, I have a 3/4X .32 straight and it is the only straight barrel rifle that feel good to hold.
                                         Turtle
Logged

Dave Patterson

  • Guest
Re: Custom barrel makers?
« Reply #7 on: November 15, 2016, 04:23:18 AM »
Thank you all.

Now I've got some directions to search in; the odyssey begins. 
Logged
Pages: [1]   Go Up
« previous next »