« previous next »
Pages: [1]   Go Down

Author Topic: Thickness of sheet stock for ram rod pipes?  (Read 3112 times)

Offline Goo

  • Hero Member
  • *****
  • Posts: 708
Thickness of sheet stock for ram rod pipes?
« on: July 04, 2017, 03:41:47 AM »
I am Looking for opinions on what thickness of brass sheet stock most people like to use for cold formed ram rod pipes on fowlers, rifles and pistols.
Logged
Opinions are expensive. Rich people rarely if ever voice their opinion.

Offline Ed Wenger

  • Global Moderator
  • Hero Member
  • *
  • Posts: 2457
Re: Thickness of sheet stock for ram rod pipes?
« Reply #1 on: July 04, 2017, 03:50:16 AM »
I mostly use .040 - .045...

      Ed
Logged
Ed Wenger

Online rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19540
Re: Thickness of sheet stock for ram rod pipes?
« Reply #2 on: July 04, 2017, 04:33:57 AM »
I'm using 1/32" for a current fowling piece. When using stock this thin, there's got to be more forming and less filing.
Logged
Andover, Vermont

Offline conquerordie

  • Hero Member
  • *****
  • Posts: 528
Re: Thickness of sheet stock for ram rod pipes?
« Reply #3 on: July 04, 2017, 04:48:30 AM »
My last ones read. 025 to .028 on micrometers. I've used .032 as well.
Greg
Logged

Offline Mark Elliott

  • Hero Member
  • *****
  • Posts: 5191
    • Mark Elliott Artist & Craftsman
Re: Thickness of sheet stock for ram rod pipes?
« Reply #4 on: July 04, 2017, 05:16:36 AM »
I use the same as Ed including in steel if the thimbles are to be filed.
Logged

Offline David Rase

  • Hero Member
  • *****
  • Posts: 4320
  • If we need it here, make it here. Charlie Daniels
Re: Thickness of sheet stock for ram rod pipes?
« Reply #5 on: July 04, 2017, 05:24:27 AM »
I am using .040".  I started out years ago using .050 for steel and .062 for brass.  This was what was recommended by the late John Bivins.  Over the years I have progressively honed my inletting skills thus being able to graduate to thinner and thinner material.  Even my patch boxes are made from .040". 
David
Logged

Offline SingleMalt

  • Hero Member
  • *****
  • Posts: 613
  • One day I'll be considered a good builder.
Re: Thickness of sheet stock for ram rod pipes?
« Reply #6 on: July 04, 2017, 06:01:58 AM »
I used .050" for the last ones I made.  The filing is pretty deep.
Logged
Never drink whisky that isn't old enough to vote.

"The penalty good men pay for indifference to public affairs is to be ruled by evil men."- Plato

"The Constitution shall never be construed to prevent the people of the United States who are peaceable citizens from keeping their own arms."

Offline flehto

  • Hero Member
  • *****
  • Posts: 3335
Re: Thickness of sheet stock for ram rod pipes?
« Reply #7 on: July 04, 2017, 03:06:04 PM »
.040 for both RR pipes and Mcaps. _Pboxes are .050.....Fred
Logged

Offline Goo

  • Hero Member
  • *****
  • Posts: 708
Re: Thickness of sheet stock for ram rod pipes?
« Reply #8 on: July 04, 2017, 03:08:10 PM »
Many thanks for the info it is greatly appreciated.
Logged
Opinions are expensive. Rich people rarely if ever voice their opinion.

Offline P.W.Berkuta

  • Hero Member
  • *****
  • Posts: 2215
Re: Thickness of sheet stock for ram rod pipes?
« Reply #9 on: July 04, 2017, 07:19:47 PM »
I have both 0.040" & 0.050" sheet brass stock and use either depending on the part I'm making. Most of my patchbox lid & heads are from brass stock 0.050" thick which allow for filing & sanding to final shape and removing any deep scratches/dents. The sides if used are 0.040" thick. 95% of my ramrod thimbles start life from 0.040" thick brass stock.
Logged
"The person who says it cannot be done should not interrupt the person who is doing it." - Chinese proverb

Offline deepcreekdale

  • Hero Member
  • *****
  • Posts: 641
Re: Thickness of sheet stock for ram rod pipes?
« Reply #10 on: July 06, 2017, 04:43:28 PM »
I use .040. Thin enough to form easily after annealing, thick enough to take some filing. I remember reading once, although I don't recall the source, that most if not all the brass thimbles etc on originals mike out to about .040. Don't know if that is true but it seems to work OK.
Logged
”Far and away the best prize that life has to offer is the chance to work hard at work worth doing.” Theodore Roosevelt

Offline WKevinD

  • Hero Member
  • *****
  • Posts: 1428
Re: Thickness of sheet stock for ram rod pipes?
« Reply #11 on: July 06, 2017, 05:46:20 PM »
A few years ago I came across some old doors with brass kickplates they measured out .040 and have been serving well.
Annealing them burns off the varnish and or paint.
I had some that were .062  but that was a little heavy for most stuff
Kevin
Logged
PEACE is that glorious moment in history when everyone stands around reloading.  Thomas Jefferson

Offline BOB HILL

  • Hero Member
  • *****
  • Posts: 2283
Re: Thickness of sheet stock for ram rod pipes?
« Reply #12 on: July 06, 2017, 09:53:06 PM »
I'm with Burnt, been using old kick plates for all the years I've built guns. Didn't know the actual thickness. Use the same thing for brass patchboxes. Used the hood off of a buddy's old Bronco for iron mounted guns for years. Don't  know how thick that is though.    Bob
Logged
South Carolina Lowcountry
Pages: [1]   Go Up
« previous next »