Author Topic: WTK: C.R. Douglas built Flintlock? Anyone know him? Golden Age Firearms Co.?  (Read 8899 times)

AZ Longrifle

  • Guest
I bought my 1st Flintlock Rifle by C.R. Douglas.
Anyone know who he is or where he is located?
Thank you!

Offline rsells

  • Hero Member
  • *****
  • Posts: 681
I assume the Douglas stamp is on the barrel in block letters and caliber stamped in line with it.  Douglas barrel company marked their barrels this way.
                                                                                 Roger Sells

Offline Dphariss

  • Hero Member
  • *****
  • Posts: 9920
  • Kill a Commie for your Mommy
I bought my 1st Flintlock Rifle by C.R. Douglas.
Anyone know who he is or where he is located?
Thank you!

G.R. Douglas is a barrel maker that used to do ML barrels.
Usually stamped with small block letters and the caliber is often stamped as well.
They made 7 groove barrels for Golden Age Arms and the one I have is marked GR Douglas for Golden Age Arms or some such.

Dan
He who dares not offend cannot be honest. Thomas Paine

AZ Longrifle

  • Guest
Thank you both, that's what I needed to know.
I found that Jim Johnson had the rifle built by one of his Gunsmiths in the 1970s.
Golden Age Firearms Co. was the name on it.

Offline B Shipman

  • Hero Member
  • *****
  • Posts: 1928
    • W.G. Shipman Gunmaker
One of those gunsmiths was Jerry Kirkland. And if so you probably have a very fine rifle. If you can post some pictures prehaps we can tell.

AZ Longrifle

  • Guest
One of those gunsmiths was Jerry Kirkland. And if so you probably have a very fine rifle. If you can post some pictures prehaps we can tell.
I'll take some pics of it this weekend and post them.
Thanks

Offline bowkill

  • Sr. Member
  • ****
  • Posts: 309
I will post some picks tomorrow of one..
μολὼν λαβέ (Come and take them)

Offline bowkill

  • Sr. Member
  • ****
  • Posts: 309
μολὼν λαβέ (Come and take them)

Offline D. Buck Stopshere

  • Full Member
  • ***
  • Posts: 141
If I am reading the lock plate correctly, it might be "Ray L. Morgan, Dalton, GA".

When I shot on the pistol line at Friendship back in the '80's and '90's, I met Ray and bought a "rack & pinion" cylinder press for my revolver loading. I still use the press, sn #11, today at local matches.

I'd give my right arm to be ambidextrous.

NMLRA Field Rep- North Carolina

Offline bowkill

  • Sr. Member
  • ****
  • Posts: 309
Don't mean to hijack this thread but need to start a new thread and see what people know about rifle..
μολὼν λαβέ (Come and take them)

Offline smokinbuck

  • Hero Member
  • *****
  • Posts: 3005
During that same time period Jim had rifles being made by Larry Bryner and Dick Bingham as well as Jerry Kirkland. All were very accomplished builders. A friend has a Vincent built by Jerry. A beautiful simple rifle.
Mark
Mark