« previous next »
Pages: [1]   Go Down

Author Topic: cut outs in tomahawk heads  (Read 1994 times)

saltland

  • Guest
cut outs in tomahawk heads
« on: January 31, 2018, 09:36:18 PM »
I don't build tomahawks so sorry if this is a dumb question.Cut out designs in tomahawk head ..steel or brass...how is that usually done?At the time of forging?
Thanks
Scott
Logged

Offline TN Longhunter

  • Sr. Member
  • ****
  • Posts: 287
Re: cut outs in tomahawk heads
« Reply #1 on: January 31, 2018, 10:24:32 PM »
After 99% of forging is done. Drill hole, insert saw blade (Jewelers saw), attach to saw and start cutting.  At least that is how to do it today. In primitive setting, drill or punch a hole in blade and then attack with a good file.
Logged
Don Spires
Tennessee Longhunters
Patron Life NRA
NMLRA
CLA

Loyalist Dave

  • Guest
Re: cut outs in tomahawk heads
« Reply #2 on: March 07, 2018, 10:59:23 PM »
I drill a hole in a basic head, maybe more than one, and go to work with a hand file.   :o

LD
Logged

Offline Hungry Horse

  • Hero Member
  • *****
  • Posts: 5565
Re: cut outs in tomahawk heads
« Reply #3 on: March 08, 2018, 12:14:57 AM »
I would suspect that back in the day the initial hole was hot punched, and then opened up and shaped from there. Drilling through thick iron was a real job with primitive tools.

 Hungry Horse
Logged
Pages: [1]   Go Up
« previous next »