Author Topic: Ramrod stuck again @#%&  (Read 5654 times)

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15846
Re: Ramrod stuck again @#%&
« Reply #25 on: April 18, 2018, 06:34:46 PM »
Yes - out of the stock. We do that with all guns. Pins or wedges, does not matter. Only a SMALL amount of care is needed, but it is best to do this

before too much beer flows.
« Last Edit: April 18, 2018, 06:34:59 PM by Daryl »
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline hanshi

  • Hero Member
  • *****
  • Posts: 5335
  • My passion is longrifles!
    • martialartsusa.com
Re: Ramrod stuck again @#%&
« Reply #26 on: April 18, 2018, 10:06:14 PM »
If there is a crud ring, I push a wet patch all the way down and let it stay there a few minutes.  Crud ring comes right out without using force.  Mostly there is no crud ring formed.

Welcome to the forum, alacran.  ;D
!Jozai Senjo! "always present on the battlefield"
Young guys should hang out with old guys; old guys know stuff.

Turtle

  • Guest
Re: Ramrod stuck again @#%&
« Reply #27 on: April 19, 2018, 05:40:21 PM »
 A dealer I used to work for manufactured tapered jags. They had a max diameter at the tip and tapered to accommodate the larger diameter of the bunched up bulkier patch  further back. They work well and clean to the breach well and are less likely to get stuck. Unfortunately, they no longer make them, but you can modify a jag easily