« previous next »
Pages: [1]   Go Down

Author Topic: Barrel blanks??  (Read 7451 times)

Offline Longknife

  • Hero Member
  • *****
  • Posts: 2094
Barrel blanks??
« on: May 14, 2009, 05:32:07 PM »
I'm looking for a source of unrifled barrels, I would like to try rifling my own, Any ideas???? Thanks, Ed
Logged
Ed Hamberg

Offline jerrywh

  • Hero Member
  • *****
  • Posts: 8885
    • Jerrywh-gunmaker- Master Engraver FEGA.
Re: Barrel blanks??
« Reply #1 on: May 14, 2009, 07:52:02 PM »
Buy a smooth bore from a barrel maker.
Logged
Nobody is always correct, Not even me.

Offline T*O*F

  • Hero Member
  • *****
  • Posts: 5123
Re: Barrel blanks??
« Reply #2 on: May 14, 2009, 08:45:50 PM »
Since you previously asked about boring and reaming your own, consider the following sources:

Truck axles, forged pry bars, seamless tubing, 1137 or 4140 bar stock.
Logged
Dave Kanger

If religion is opium for the masses, the internet is a crack, pixel-huffing orgy that deafens the brain, numbs the senses and scrambles our peer list to include every anonymous loser, twisted deviant, and freak as well as people we normally wouldn't give the time of day.
-S.M. Tomlinson

Offline jerrywh

  • Hero Member
  • *****
  • Posts: 8885
    • Jerrywh-gunmaker- Master Engraver FEGA.
Re: Barrel blanks??
« Reply #3 on: May 14, 2009, 09:14:06 PM »
It's really fun boring out truck axels.
Logged
Nobody is always correct, Not even me.

Offline Jim Chambers

  • Hero Member
  • *****
  • Posts: 1828
Re: Barrel blanks??
« Reply #4 on: May 14, 2009, 09:34:23 PM »
Rice Barrels always provides the barrel blanks that Barbie has hand rifled at Friendship each year on the back porch of Gunmaker's Hall.
« Last Edit: May 14, 2009, 09:34:55 PM by Jim Chambers »
Logged

Offline JCKelly

  • Hero Member
  • *****
  • Posts: 1434
Re: Barrel blanks??
« Reply #5 on: May 14, 2009, 09:44:22 PM »
I have a 15/16 .45 cal smooth in 41L40 made by Harry Kesselring, New York State, in the '80's. If you can use it, then let us Dicker (if not Dickert).
Logged

Offline Longknife

  • Hero Member
  • *****
  • Posts: 2094
Re: Barrel blanks??
« Reply #6 on: May 14, 2009, 11:37:25 PM »
I don't want to "make"barrels,  I can't afford the machinery to do that, and I can't imagine trying to bore out a solid bar or truck axle by hand either!!!!!! I want to re-bore existing shot out barrels, or rifle bored and reamed barrels, purchased from a supplier. No one lists smooth barrels on the net and a few inquireries have gone unanswered. To order a custom barrel un- rifled cost as much as one that is rifled!!!Maybe my brainstorm is not such a good idea and I should leave all thsi up to Getz, Rayl, and Hoyt???....Ed
Logged
Ed Hamberg

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19534
Re: Barrel blanks??
« Reply #7 on: May 14, 2009, 11:52:24 PM »
If you're trying to save money, forget it.  If you want to learn how to rifle a barrel and enjoy shooting it, you may be able to find some old barrels that need to be reamed out and re-breeched and re-rifled.  This would simulate what an old time gunsmith might do with a shot out gun.  I have 2 barrels I am freshing now- a .36 and a .64.

rp
Logged
Andover, Vermont

Offline jerrywh

  • Hero Member
  • *****
  • Posts: 8885
    • Jerrywh-gunmaker- Master Engraver FEGA.
Re: Barrel blanks??
« Reply #8 on: May 15, 2009, 12:29:15 AM »
Amen to Rich. You will nto save any money but you will llearn a lot and have a lot of fun. Everybody ought to rifle a barrel by hand some time and everybody ought to make a flint lock from a pile of scrap iron.
Logged
Nobody is always correct, Not even me.

Offline Acer Saccharum

  • Hero Member
  • *****
  • Posts: 19311
    • Thomas A Curran
Re: Barrel blanks??
« Reply #9 on: May 15, 2009, 02:16:27 AM »
Longknife, I have a barrel for ye. Write me.
Logged
Tom Curran's web site : http://monstermachineshop.net
Ramrod scrapers are all sold out.

Offline T*O*F

  • Hero Member
  • *****
  • Posts: 5123
Re: Barrel blanks??
« Reply #10 on: May 15, 2009, 02:31:49 AM »
I thought I had sent this already, but I must not have hit the Post button.

Quote
I don't want to "make"barrels,  I can't afford the machinery to do that

Comment removed by Admin. (acer, again)

Quote
I can't imagine trying to bore out a solid bar or truck axle by hand either

I seem to recall that Hacker Martin used to make barrels out of truck axles.  He didn't have any fancy equipment.  Old axles from the 50's or earlier make the best barrels.
« Last Edit: May 15, 2009, 05:42:54 AM by Acer Saccharum »
Logged
Dave Kanger

If religion is opium for the masses, the internet is a crack, pixel-huffing orgy that deafens the brain, numbs the senses and scrambles our peer list to include every anonymous loser, twisted deviant, and freak as well as people we normally wouldn't give the time of day.
-S.M. Tomlinson

Offline P.W.Berkuta

  • Hero Member
  • *****
  • Posts: 2213
Re: Barrel blanks??
« Reply #11 on: May 15, 2009, 05:10:16 PM »
Dixie use to sell un-rifled barrels (a while back) - don't know if they still do ???
Logged
"The person who says it cannot be done should not interrupt the person who is doing it." - Chinese proverb

Offline Dphariss

  • Hero Member
  • *****
  • Posts: 9920
  • Kill a Commie for your Mommy
Re: Barrel blanks??
« Reply #12 on: May 16, 2009, 05:44:34 PM »
Quote from: Longknife on May 14, 2009, 05:32:07 PM
I'm looking for a source of unrifled barrels, I would like to try rifling my own, Any ideas???? Thanks, Ed

Tip Curtis has SB Green Mountain barrels.
I *think* his email is tipcurtis@bellsouth.net
Don't use seamless tubing.

Dan
Logged
He who dares not offend cannot be honest. Thomas Paine

msblacksmith

  • Guest
Re: Barrel blanks??
« Reply #13 on: May 25, 2009, 05:23:29 AM »
you could forge one . that would be fun. ;D
Logged

Offline David Veith

  • Hero Member
  • *****
  • Posts: 611
    • davids painting
Re: Barrel blanks??
« Reply #14 on: May 25, 2009, 02:38:39 PM »
Ed Raly (SP)sells us some but I will warn you they are tough to cut. 4150 or 4140 steel is what he uses alot unless he has change.
David Veith
Logged
David Veith

Offline chris laubach

  • Sr. Member
  • ****
  • Posts: 275
  • Marietta, Pa
Re: Barrel blanks??
« Reply #15 on: May 25, 2009, 02:54:09 PM »
Quote from: msblacksmith on May 25, 2009, 05:23:29 AM
you could forge one . that would be fun. ;D


Yeah, It's real fun! ;D




Chris Laubach
Logged
Pages: [1]   Go Up
« previous next »