« previous next »
Pages: [1]   Go Down

Author Topic: Horn With Carved Bands  (Read 7770 times)

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18385
  • AKA TimBuckII
Horn With Carved Bands
« on: June 02, 2009, 03:53:15 PM »

 This horn has the bands carved from the horn itself. It is 16 1/2" around the ouside curve tip to tip, the walnut base is about 2 1/2" across, held in with 7 steel pins, the tip is antler and is about 2 1/4" long and is held on with 2 pins.
 I was surprised that the neck was about 95% naturaly black.

Tim C.





Logged

Offline G-Man

  • Hero Member
  • *****
  • Posts: 2217
Re: Horn With Carved Bands
« Reply #1 on: June 02, 2009, 04:50:57 PM »
Tim - that is one really fine banded horn.  I really like the proportions and coloring of that one.  Nice work.

Guy
Logged

Online rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19524
Re: Horn With Carved Bands
« Reply #2 on: June 02, 2009, 05:26:26 PM »
That's just a lot of work!  Fine work, but a LOT OF WORK!  Well done.
Logged
Andover, Vermont

tuffy

  • Guest
Re: Horn With Carved Bands
« Reply #3 on: June 02, 2009, 07:41:21 PM »
Tim---is that tip turned on a lathe or is it hand filed? Very nice work either way.
Logged

Offline G. Elsenbeck

  • Hero Member
  • *****
  • Posts: 1234
Re: Horn With Carved Bands
« Reply #4 on: June 03, 2009, 12:02:02 AM »
Tim, excellent job and a whole lot of work.  This is just what you need to do when a 'heavy' horn around.  The color came out perfect and a black tip to boot!  Did you try the 'brewed tea' for dying the tip?  Great job again.  Will any of us get to see any of these at Dixon's?
Gary
Logged
Journeyman in the Honourable Company of Horners (HCH) and a member in the Contemporary Longrifle Association (CLA)

There is a very fine line between "hobby" and "mental illness."

Offline Cory Joe Stewart

  • Hero Member
  • *****
  • Posts: 1862
    • My etsy shop
Re: Horn With Carved Bands
« Reply #5 on: June 03, 2009, 12:02:33 AM »
Tim,

I think that is my favorite one so far. 

Coryjoe
Logged

Offline G. Elsenbeck

  • Hero Member
  • *****
  • Posts: 1234
Re: Horn With Carved Bands
« Reply #6 on: June 03, 2009, 12:04:37 AM »
Tim, another thought.  I believe you found the answer to never having a band break, get loose or lost.  ;D
Gary
Logged
Journeyman in the Honourable Company of Horners (HCH) and a member in the Contemporary Longrifle Association (CLA)

There is a very fine line between "hobby" and "mental illness."

Offline C Wallingford

  • Hero Member
  • *****
  • Posts: 863
  • Northern Kentucky
    • CW Knives
Re: Horn With Carved Bands
« Reply #7 on: June 03, 2009, 12:37:27 AM »
That is a beauty, Tim. Very nice work.
Logged

Offline David Rase

  • Hero Member
  • *****
  • Posts: 4320
  • If we need it here, make it here. Charlie Daniels
Re: Horn With Carved Bands
« Reply #8 on: June 03, 2009, 04:05:06 PM »
Nice looking horn Tim.  From a guy who carved a ten band horn last year, I can appreciate the work and effort you put into this horn.   
DMR
Logged

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18385
  • AKA TimBuckII
Re: Horn With Carved Bands
« Reply #9 on: June 03, 2009, 05:06:02 PM »
 Thanks for the complements. The tip was turned on a lathe and is colored with saddle tan leather dye.
 I am still not sure if it takes longer to carve the bands or to sacrifice a couple of horns for bands, boil them put them on a sizer, rough turn them, take them off, test fit to find 3 or 4 that will not only fit but space out right, put them back on the sizer, finish turn them, take them back off, reheat them, put them on the horn and attach them.
 

Tim C.
« Last Edit: June 03, 2009, 05:06:36 PM by Tim Crosby »
Logged

mill creek trading

  • Guest
Re: Horn With Carved Bands
« Reply #10 on: June 05, 2009, 10:13:56 PM »
Exceptional horn, in both structural design and color selection. Anyone should be proud to own a horn like that.
Logged

omark

  • Guest
Re: Horn With Carved Bands
« Reply #11 on: June 06, 2009, 03:11:13 AM »
tim, you mention putting the rings back on the sizer and turning them. wondering how they are kept on while turning?     thanks, mark
Logged

Offline G. Elsenbeck

  • Hero Member
  • *****
  • Posts: 1234
Re: Horn With Carved Bands
« Reply #12 on: June 06, 2009, 03:27:10 AM »
I would imagine you want to reheat them before putting them on the sizers and wait for them to dry before turning.  At least thats whats work for me.
Gary
Logged
Journeyman in the Honourable Company of Horners (HCH) and a member in the Contemporary Longrifle Association (CLA)

There is a very fine line between "hobby" and "mental illness."

omark

  • Guest
Re: Horn With Carved Bands
« Reply #13 on: June 06, 2009, 08:29:07 AM »
thanks gary, mark
Logged

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18385
  • AKA TimBuckII
Re: Horn With Carved Bands
« Reply #14 on: June 07, 2009, 11:35:23 PM »
Quote from: G. Elsenbeck on June 06, 2009, 03:27:10 AM
I would imagine you want to reheat them before putting them on the sizers and wait for them to dry before turning.  At least thats whats work for me.
Gary

 Gary is right, at least that's the way I do it.

Tim C.
Logged

Offline John Proud

  • Full Member
  • ***
  • Posts: 175
Re: Horn With Carved Bands
« Reply #15 on: June 15, 2009, 05:51:12 AM »
Quote from: omark on June 06, 2009, 03:11:13 AM
tim, you mention putting the rings back on the sizer and turning them. wondering how they are kept on while turning?     thanks, mark

I don't necessarily reheat them, although you can. Usually they will stay on the sizer by just applying saliva to the ring and tapping it on. The saliva swells the wood sizer in addition to making the horn a bit "sticky". In fact they often stick well enough that it takes a special effort to get them back off. John 
Logged

Offline G. Elsenbeck

  • Hero Member
  • *****
  • Posts: 1234
Re: Horn With Carved Bands
« Reply #16 on: June 15, 2009, 06:00:42 AM »
John, welcome to the forum and thanks for sharing your expertise.  I've been a fan of your horn work for quite some time along with your inputs in The Horn Book.  Hope to meet you at Dixons perhaps?
Gary
Logged
Journeyman in the Honourable Company of Horners (HCH) and a member in the Contemporary Longrifle Association (CLA)

There is a very fine line between "hobby" and "mental illness."

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18385
  • AKA TimBuckII
Re: Horn With Carved Bands
« Reply #17 on: June 15, 2009, 04:12:46 PM »
 Hi John, I second gary's welcome, glad to see you here.

Tim C.
Logged
Pages: [1]   Go Up
« previous next »