« previous next »
Pages: [1]   Go Down

Author Topic: Finished Little Fella's Rifle  (Read 2820 times)

Offline smart dog

  • Global Moderator
  • Hero Member
  • *
  • Posts: 7019
Finished Little Fella's Rifle
« on: December 27, 2018, 11:03:21 PM »
Hi,
I just finished this little rifle.  It is for an older target shooter who cannot hold a heavy gun anymore.  He is of small stature so this little rifle should work out. I installed a Lyman front globe sight and I modified a Johnson peep sight to give him some elevation adjustment. While I prefer original looking sights, I have to admit the sight picture is awesome. The gun is 50 cal and the stock is fairly plain maple. I tweaked the shape of the stock to be a bit more "early Reading" and carved the simple designs found on those guns.  The stock was stained with ferric nitrate and finished with Sutherland-Welles polymerized tung oil. I modified the Siler lock plate and made a replacement side plate more consistent with Reading guns. This is the first kit gun I've built from the start. It was fun but I much prefer working from a blank so the gun is really my own work, good and bad.  Enjoy.

dave















 
Logged
"The main accomplishment of modern economics is to make astrology look good."

Offline msellers

  • Hero Member
  • *****
  • Posts: 599
Re: Finished Little Fella's Rifle
« Reply #1 on: December 27, 2018, 11:08:24 PM »
Dave,

That is one impressive piece. I like the subtle changes you amde. Should be a sweet shooter, and make for an impressive conversation piece. Would make a fine hunting rifle as well if one was in practice and put slightly larger apertures in the sights.
Mike
Logged

Offline hanshi

  • Hero Member
  • *****
  • Posts: 5335
  • My passion is longrifles!
    • martialartsusa.com
Re: Finished Little Fella's Rifle
« Reply #2 on: December 27, 2018, 11:17:04 PM »
I really like how you built that rifle.  Can I call it "cute"?
Logged
!Jozai Senjo! "always present on the battlefield"
Young guys should hang out with old guys; old guys know stuff.

Offline Top Jaw

  • Hero Member
  • *****
  • Posts: 575
Re: Finished Little Fella's Rifle
« Reply #3 on: December 27, 2018, 11:25:14 PM »
I’d say you did make that your own work in the end!  Nice touches throughout.
Logged

Offline Lucky R A

  • Hero Member
  • *****
  • Posts: 1628
  • In Costume
Re: Finished Little Fella's Rifle
« Reply #4 on: December 27, 2018, 11:34:28 PM »
Hi Dave,
      Was the kit supplied with the tombstone hardware, did you modify it or supply your own?   The reason I ask is that I have very seldom seen any Berks Co. guns with tombstone hardware.   I worked on one original  piece that had such, it was from southern Berks Co. not that far west of Bucks Co.  I always thought that it was a "crossover gun."
      I like the idea of the sights for the more senior members to continue enjoying making smoke..   Well done.

Ron
Logged
"The highest reward that God gives us for good work is the ability to do better work."  - Elbert Hubbard

Offline smart dog

  • Global Moderator
  • Hero Member
  • *
  • Posts: 7019
Re: Finished Little Fella's Rifle
« Reply #5 on: December 28, 2018, 12:11:10 AM »
Hi
Thanks folks.  Ron, the guard came with the kit.  I don't care for the butt plate or guard. I really would have liked the Berks guard designed by David Dodds but then the set triggers would not fit.   I did manage to get rid of the English fowler side plate and make a better Berks Co one.  Thanks for looking and commenting.

dave
Logged
"The main accomplishment of modern economics is to make astrology look good."

Offline davebozell

  • Sr. Member
  • ****
  • Posts: 443
Re: Finished Little Fella's Rifle
« Reply #6 on: December 28, 2018, 03:53:18 AM »
I'm impressed with how close you were able to get the ramrod to the bottom of the barrel.  Usually, precarved kits have a lot of room between them.  Very nice job.  If you hadn't told us it was built from a kit, I would have thought you built it from a blank.
Logged

Offline Curtis

  • Hero Member
  • *****
  • Posts: 2338
  • Missouri
Re: Finished Little Fella's Rifle
« Reply #7 on: December 28, 2018, 08:36:21 AM »
Beautiful work Dave!  The carving is just right, and I am impressed (but not surprised) how well the peep sight turned out.  Another fine gun, glad you posted it.

Curtis
Logged
Curtis Allinson
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Sometimes, late at night when I am alone in the inner sanctum of my workshop and no one else can see, I sand things using only my fingers for backing

Offline thecapgunkid

  • Hero Member
  • *****
  • Posts: 1112
  • Matthew 25:40
Re: Finished Little Fella's Rifle
« Reply #8 on: December 28, 2018, 12:48:04 PM »
beautiful
Logged

Offline flehto

  • Hero Member
  • *****
  • Posts: 3335
Re: Finished Little Fella's Rifle
« Reply #9 on: December 28, 2018, 03:27:43 PM »
The carving behind the cheek piece is simple but it fills that space so elegantly. Your workmanship is beyond reproach......Fred
Logged

Offline SingleMalt

  • Hero Member
  • *****
  • Posts: 613
  • One day I'll be considered a good builder.
Re: Finished Little Fella's Rifle
« Reply #10 on: December 28, 2018, 04:38:34 PM »
I think you've done a fine job, Dave.  The carving is just enough, and earlier Berks rifles weren't heavily carved anyway.  The problem with early Berks rifles is the lack of guards and buttplates.  They're more interesting than other schools and have beautiful lines.
Logged
Never drink whisky that isn't old enough to vote.

"The penalty good men pay for indifference to public affairs is to be ruled by evil men."- Plato

"The Constitution shall never be construed to prevent the people of the United States who are peaceable citizens from keeping their own arms."

Offline smart dog

  • Global Moderator
  • Hero Member
  • *
  • Posts: 7019
Re: Finished Little Fella's Rifle
« Reply #11 on: December 28, 2018, 05:10:16 PM »
Thanks everybody,
Dave, the ramrod fit was by design.  It did have a substantial gap between the rod and muzzle.  My solution was to realize the rod flexes and the channel and hole for the ramrod can curve a little. Therefore, I chiseled out the ramrod groove so the web of wood thinned toward the muzzle.

dave
Logged
"The main accomplishment of modern economics is to make astrology look good."

Offline James Rogers

  • Hero Member
  • *****
  • Posts: 3164
  • James Rogers
    • Fowling Piece
Re: Finished Little Fella's Rifle
« Reply #12 on: December 28, 2018, 05:25:48 PM »
Very nice transformation!
Logged

Offline tlallijr

  • Full Member
  • ***
  • Posts: 180
Re: Finished Little Fella's Rifle
« Reply #13 on: December 28, 2018, 05:46:50 PM »
Looks great Dave,  I enjoyed following your updates of this build.  Tony
Logged

Offline P.W.Berkuta

  • Hero Member
  • *****
  • Posts: 2215
Re: Finished Little Fella's Rifle
« Reply #14 on: December 28, 2018, 07:10:46 PM »
Man - O - Man -- that is one FINE rifle in all respects ;) 8) 8)!!! I love it and when I get done with my 1/2 dozen or so other rifles I WILL be building one similar to this - absolutely love the sights ;D ;) :).
Logged
"The person who says it cannot be done should not interrupt the person who is doing it." - Chinese proverb

Offline TommyG

  • Hero Member
  • *****
  • Posts: 601
  • "Double Trouble"
Re: Finished Little Fella's Rifle
« Reply #15 on: December 29, 2018, 12:02:31 AM »
Dave, Very well done!!!  That's a little fella's rifle that any big fella wouldn't mind having..   Great job! 
Logged
Pages: [1]   Go Up
« previous next »