typical thickness of toe plate and muzzle cap brass on originals

[Jerry V Lape]

How thick are typical toe plates and muzzle caps on originals?  Couple of dimensions I haven't  measured.

[deepcreekdale]

On original ones that I have been able to measure, most of the brass pieces tend to be about 0.40 while toe plates occasionally ran a little bit thicker.

[DHS]

On original ones that I have been able to measure, most of the brass pieces tend to be about 0.40 while toe plates occasionally ran a little bit thicker.

Do you mean .040? 

[Mike Brooks]

I use 1/16" for toe plates and something less than that for muzzle caps. Most folks toeplates are way too thick.

[JTR]

From what I've seen, probably more like .020"