« previous next »
Pages: 1 [2]   Go Down

Author Topic: Starting Fainot patchbox #2  (Read 3767 times)

Offline Acer Saccharum

  • Hero Member
  • *****
  • Posts: 19311
    • Thomas A Curran
Re: Starting Fainot patchbox #2
« Reply #25 on: September 01, 2019, 06:02:41 PM »
Rich that box is so strong, you could put a combination lock on it.
Logged
Tom Curran's web site : http://monstermachineshop.net
Ramrod scrapers are all sold out.

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19538
Re: Starting Fainot patchbox #2
« Reply #26 on: September 03, 2019, 04:59:37 AM »
Made and installed the catch spring today. It has a hook that anchors in a little mortise at the buttplate edge and then is riveted there. A spike goes up through a hole in the surround just next to the lid edge, and a brass button is soldered to that topside. I like to install the spring with a little preload. The working arm is 0.040” thick which seems right for tension.  I have never seen the catch spring on an original but know it has the hook, the anchoring rivet, “ledge” catch, and spike post for the button b















Now all that’s left is making and installing the catch on the lid. Probably should have done that as an earlier step.
Logged
Andover, Vermont

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19538
Re: Starting Fainot patchbox #2
« Reply #27 on: September 05, 2019, 12:07:19 AM »
Put in the patchbox catch stud and tuned it. It closes smartly with a nice “snick” sound. It’s the little things.







www d11 org
Logged
Andover, Vermont

Offline vanu

  • Full Member
  • ***
  • Posts: 190
Re: Starting Fainot patchbox #2
« Reply #28 on: September 05, 2019, 04:35:01 AM »
Rich,

Wonderful!

The only correction I'd point out is that the spring for the door is actually curled inward like a knuckle; other than that its a masterful re-creation of (in my opinion) the best G.F. Fainot patchbox!

Bruce Larson
Logged

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19538
Re: Starting Fainot patchbox #2
« Reply #29 on: September 05, 2019, 06:03:33 AM »
Thanks, Bruce! Looking forward to finishing this rifle up.
Logged
Andover, Vermont

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19538
Re: Starting Fainot patchbox #2
« Reply #30 on: September 10, 2019, 03:40:59 PM »
Been engraving the box. Still have the lid central design to do.




total loss calculator
Logged
Andover, Vermont

Offline msellers

  • Hero Member
  • *****
  • Posts: 599
Re: Starting Fainot patchbox #2
« Reply #31 on: September 10, 2019, 08:08:11 PM »
That is an impresive piece of work. Looking forward to seeing the completed gun.
Mike
Logged

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15839
Re: Starting Fainot patchbox #2
« Reply #32 on: September 10, 2019, 08:13:25 PM »
HooRa, Rich. Well done.
Logged
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19538
Re: Starting Fainot patchbox #2
« Reply #33 on: September 12, 2019, 12:08:32 AM »
Finished up the engraving. I figure the only way to gain some level of competence is to do it. I intentionally am working on “folksy” projects and hope the whole effect is greater than the sum of the parts. It’s a fun project.



Logged
Andover, Vermont

Offline msellers

  • Hero Member
  • *****
  • Posts: 599
Re: Starting Fainot patchbox #2
« Reply #34 on: September 12, 2019, 03:23:07 AM »
Rich,
Very nice, I like how that turned out. The engaving looks really good to me.
Mike
Logged

Offline Nordnecker

  • Hero Member
  • *****
  • Posts: 1244
Re: Starting Fainot patchbox #2
« Reply #35 on: September 13, 2019, 02:23:39 PM »
Yeah, that's a real piece of work, there. I can see the add, " Buy this patchbox and the rifle is free."
Logged
"I can no longer stand back and allow communist infiltration, communist indoctrination and the international communist conspiracy to sap and impurify our precious bodily fluids."- Gen Jack T. Ripper

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19538
Re: Starting Fainot patchbox #2
« Reply #36 on: September 19, 2019, 05:28:31 PM »
About done with the carving behind the cheekpiece. Some have described this design as a Gordian knot but it’s really an arabesque. Or simply copied off a carpet beater (Acer’s theory)  ;D




Taking morning light makes it look taller than it is.
Logged
Andover, Vermont

Offline Ed Wenger

  • Global Moderator
  • Hero Member
  • *
  • Posts: 2457
Re: Starting Fainot patchbox #2
« Reply #37 on: September 21, 2019, 05:00:17 AM »
Rich..., that looks really good.  It’s difficult to not get a flat spot or two on circles like that, and you’ve got a lot of circles there!  Also, it’s difficult to get nice parallel lines while doing curves / circles.  Lookin’ good!


               Ed
Logged
Ed Wenger
Pages: 1 [2]   Go Up
« previous next »