« previous next »
Pages: [1]   Go Down

Author Topic: Barrel channel scrapers  (Read 2589 times)

Online A.Merrill

  • Hero Member
  • *****
  • Posts: 796
Barrel channel scrapers
« on: October 31, 2019, 09:12:01 AM »
Has anybody used the barrel channel scrapers  that Brownells sells  ?    Al
Logged
Alan K. Merrill

Online rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19524
Re: Barrel channel scrapers
« Reply #1 on: October 31, 2019, 03:29:03 PM »
If you mean the ones with multiple cutters mounted on a bent square rod, yes. They are the real deal. Zero chatter, smooth cut, no ripples.
Logged
Andover, Vermont

Offline rsells

  • Hero Member
  • *****
  • Posts: 681
Re: Barrel channel scrapers
« Reply #2 on: November 01, 2019, 06:37:37 PM »
I have the barrel channel scrapers that Brownells sells and I think they work great.  I wish I had picked up some of these years ago.
                                                                                   Roger Sells
Logged

Offline Craig Wilcox

  • Hero Member
  • *****
  • Posts: 2532
Re: Barrel channel scrapers
« Reply #3 on: November 01, 2019, 07:13:15 PM »
I have the round ones, but need to find some octagon ones.  This 13/16" really needs it - doing it all now with a scraper I cut off another, larger scraper.
Logged
Craig Wilcox
We are all elated when Dame Fortune smiles at us, but remember that she is always closely followed by her daughter, Miss Fortune.

Offline wmrike

  • Full Member
  • ***
  • Posts: 248
Re: Barrel channel scrapers
« Reply #4 on: November 01, 2019, 07:53:17 PM »
I have them in different sizes.  Work great and seem to last forever.
Logged

Offline Eric Krewson

  • Hero Member
  • *****
  • Posts: 2255
Re: Barrel channel scrapers
« Reply #5 on: November 02, 2019, 02:39:50 AM »
I thought Gunline went out of business but it appears they are still making barrel bedding tools. Brownells doesn't have octagon ones but it appears they can be ordered directly from Gunline.

http://www.gunline.com/
« Last Edit: November 02, 2019, 02:48:35 AM by Eric Krewson »
Logged

Offline 45-110

  • Hero Member
  • *****
  • Posts: 544
Re: Barrel channel scrapers
« Reply #6 on: November 02, 2019, 03:43:46 PM »
Seems to me if one is a gun maker........fabricating a scraper(s) to fit your needs would be simple. The forming and tempering are all part of the "building" process.
Logged

Offline Craig Wilcox

  • Hero Member
  • *****
  • Posts: 2532
Re: Barrel channel scrapers
« Reply #7 on: November 02, 2019, 06:51:47 PM »
And that is exactly what I did - formed one with the inlet shape with three sides - bottom, first 45*, and side 90*.  Flip it around to do the other side.  Really did a fine job of final shaping the barrel channel.
I use aviation snips to cut the scraper from a larger Lie-Nielson scraper - it has various shapes cut in one end, so you can tell I've been a busy lad!
Cut just a tad oversize, file to fit, burnish the edge, done.
Logged
Craig Wilcox
We are all elated when Dame Fortune smiles at us, but remember that she is always closely followed by her daughter, Miss Fortune.

Offline SingleMalt

  • Hero Member
  • *****
  • Posts: 613
  • One day I'll be considered a good builder.
Re: Barrel channel scrapers
« Reply #8 on: November 03, 2019, 04:00:05 AM »
The large chisels at Harbor Freight are a good starting point for scrapers.  The steel is good.  Just heat, bend, shape, and reheat to red and quench in oil.
Logged
Never drink whisky that isn't old enough to vote.

"The penalty good men pay for indifference to public affairs is to be ruled by evil men."- Plato

"The Constitution shall never be construed to prevent the people of the United States who are peaceable citizens from keeping their own arms."

Offline msellers

  • Hero Member
  • *****
  • Posts: 599
Re: Barrel channel scrapers
« Reply #9 on: November 03, 2019, 04:32:25 AM »
Quote from: SingleMalt on November 03, 2019, 04:00:05 AM
The large chisels at Harbor Freight are a good starting point for scrapers.  The steel is good.  Just heat, bend, shape, and reheat to red and quench in oil.
The older wood handled ones actually were pretty good chisels if you spent sometime tunimg them. They are a touch softer than I prefer, but still hold up fair especially for the price.
Mike
Logged

Offline Nhgrants

  • Sr. Member
  • ****
  • Posts: 255
Re: Barrel channel scrapers
« Reply #10 on: November 03, 2019, 10:48:18 PM »
I never thought of shaping a card scraper for the barrel channel as mentioned  above by Craig..
I have made barrel channel scrapers out of old files.  I would think that a card type scraper  would
Be much more precise and do a finer job. I'm going to try that on the next build.
Logged
Pages: [1]   Go Up
« previous next »