« previous next »
Pages: [1]   Go Down

Author Topic: Help locating a trigger plate  (Read 923 times)

Offline sydney

  • Sr. Member
  • ****
  • Posts: 357
Help locating a trigger plate
« on: June 11, 2024, 04:33:49 AM »
Hi  looking for a trigger plate and trigger
     to use for a !/2 stock English flintlock rifle
     The plate is  4 3/4 inches long with a pineapple motif
       Thanks   Sydney
     
Logged

Offline bpd303

  • Full Member
  • ***
  • Posts: 153
Re: Help locating a trigger plate
« Reply #1 on: June 28, 2024, 04:28:35 AM »
I'm not sure but I think I saw one at our State Championship muzzle shot at Flintlocks, LLC site, you would have to call Mike and see if he has anything you could use.
http://myflintlock.com/
Logged
Randy aka bpd303        Arkansas Ozarks

Train for tomorrow, as you never know what it will bring to the fight.
I can't control the wind, all I can do is adjust my sails. ~ Semper Paratus

Offline bpd303

  • Full Member
  • ***
  • Posts: 153
Re: Help locating a trigger plate
« Reply #2 on: June 28, 2024, 05:05:18 AM »
Just thought of another place to try, Dixie Gun Works, however I would call them as not everything they have is on the web site.
Logged
Randy aka bpd303        Arkansas Ozarks

Train for tomorrow, as you never know what it will bring to the fight.
I can't control the wind, all I can do is adjust my sails. ~ Semper Paratus

Offline sydney

  • Sr. Member
  • ****
  • Posts: 357
Re: Help locating a trigger plate
« Reply #3 on: June 29, 2024, 06:58:57 PM »
Hi Randy    thanks for the help
     Sydney
Logged

Offline Clark Badgett

  • Hero Member
  • *****
  • Posts: 2260
  • Oklahoma
Re: Help locating a trigger plate
« Reply #4 on: June 30, 2024, 12:16:32 AM »
It’s a trigger plate, cut one from flat stock
Logged
Psalms 144

Offline sdilts

  • Sr. Member
  • ****
  • Posts: 431
Re: Help locating a trigger plate
« Reply #5 on: June 30, 2024, 03:15:49 AM »
You might try the Gun Works Emporium. Got my last one from them.
Logged

Offline sydney

  • Sr. Member
  • ****
  • Posts: 357
Re: Help locating a trigger plate
« Reply #6 on: June 30, 2024, 07:45:44 AM »
HI   thanks for the help
        I started to make one
           Sydney
Logged
Pages: [1]   Go Up
« previous next »