Maker of early percussion rifle

[Danville Greenhorn]

Here is what I know about this rifle.  It will measures as a .32 but actually seems to be .28-.30 caliber.  Percussion ignition

[Dave B]

Welcome to the Forum. Great rifle but I am not as versed as others here with identifying these types of rifles. That said it is very helpful for us to be able to see more of the rifle to get a sense for the architecture of the piece.  Having a photo that shows the full view of the rifle from 6" forward of the lock of the rifle to the full butt stock as well as the opposite side of the rifle showing the side plate, cheek section and butt plate. A full length shot of both sides is also helpful. The clues revealed by the details can help. The area some times can be determined by these nuances and narrow down where to look for the C S ? signature. Late percussion guns can be difficult to sort out due to the use of readily available hardware for the gunsmiths of the late 1800's. Thank you for sharing pictures of your rifle. Having more photos will help. I look forward to seeing them.

[Danville Greenhorn]

Thanks for the great advice.  I’ll take more good pictures in daylight tomorrow and post them. 

[Danville Greenhorn]

I’ve added several more pictures but neglected the right rear of the stock.  Gentle chastising and I’ll remedy that.  I am looking forward to comments and am definitely reaching out to my mentor Steve H, brother of “50 caliber Joe.”  What did I forget?

[D. Taylor Sapergia]

You forgot to post the new photos.

[Shreckmeister]

The maker is Charles Slaysman. Indiana County PA

[Danville Greenhorn]

Thanks, I’m new here and new to gun building thanks for the id.  What do you know about him?
Tim
  Aka Danville Greenhorn

[Shreckmeister]

Credit for information to Dr. James B whisker