« previous next »
Pages: [1]   Go Down

Author Topic: English breechplug  (Read 1369 times)

Offline Metalshaper

  • Hero Member
  • *****
  • Posts: 610
English breechplug
« on: May 14, 2020, 05:54:11 PM »
anyone got a Spare English, 'flat bottom'  breech plug laying about??
I'd like to get some pics of it if I could.. one shot straight into the plugs face <showing the flash channel )
then the normal front,back and side views..

seems they are scarce and I do have a lil lathe and an X2 mill..

Respect Always
Metalshaper/Jonathan
Logged

Offline T*O*F

  • Hero Member
  • *****
  • Posts: 5122
Re: English breechplug
« Reply #1 on: May 14, 2020, 06:32:06 PM »
Dag,
Do you mean a hooked, patent breech like would be found on an Alex Henry rifle?
Logged
Dave Kanger

If religion is opium for the masses, the internet is a crack, pixel-huffing orgy that deafens the brain, numbs the senses and scrambles our peer list to include every anonymous loser, twisted deviant, and freak as well as people we normally wouldn't give the time of day.
-S.M. Tomlinson

Offline Metalshaper

  • Hero Member
  • *****
  • Posts: 610
Re: English breechplug
« Reply #2 on: May 14, 2020, 07:15:13 PM »
Yeah I think those are the ones.. looking to help find some for the guys looking for them?
and wondered if I got some 4130N, if I could machine something.. just for giggles and maybe help out?

Hope you and Yours are doing OK!!

Respect Always
Jonathan
Logged

Offline eggwelder

  • Jr. Member
  • **
  • Posts: 68
Re: English breechplug
« Reply #3 on: May 14, 2020, 07:22:34 PM »
Tagging this for interest- may be interested
Logged

Offline T*O*F

  • Hero Member
  • *****
  • Posts: 5122
Re: English breechplug
« Reply #4 on: May 14, 2020, 09:38:45 PM »
I've got 3 different ones.  They are castings.  An original Rigby, a Rod England, and a Pete Allen.  The last one is a 1 incher.  The others are 1-1/8".

I'll try to get you some pics when I have time.

As an aside, Pecatonica should carry the 1" ones in stock.  However, you have to use the L&R bar lock and drip bar with that set-up. 
Logged
Dave Kanger

If religion is opium for the masses, the internet is a crack, pixel-huffing orgy that deafens the brain, numbs the senses and scrambles our peer list to include every anonymous loser, twisted deviant, and freak as well as people we normally wouldn't give the time of day.
-S.M. Tomlinson

Offline Metalshaper

  • Hero Member
  • *****
  • Posts: 610
Re: English breechplug
« Reply #5 on: May 14, 2020, 11:06:26 PM »
Dave,

I'd appreciate the pics, when you can! I'm not building a English gun, I was just trying to see if I could find a suitable plug for a couple of the other guys talking English rifles..
and if nothing else, I could try and machine one or two just for giggles and the extra machine shop practice.

Covid shot a hole in my advanced Machine shop class this semester.. waiting to see if we get to go into the shop in June?? online shop instructions, leaves something to be desired  :P
especially since I'm a visual learner.. Watching a lot of Youtube guys and their techniques!

Respect Always
Jonathan
Logged

Offline T*O*F

  • Hero Member
  • *****
  • Posts: 5122
Re: English breechplug
« Reply #6 on: May 16, 2020, 09:19:30 PM »
Pics as promised.  Left to right--castings from original Rigby, Pete Allen, Rod England.  Reversed in last picture.  Should be hi-def, so clicking on them will yield larger pics.  Center one is 1", others are 1-1/8"











Logged
Dave Kanger

If religion is opium for the masses, the internet is a crack, pixel-huffing orgy that deafens the brain, numbs the senses and scrambles our peer list to include every anonymous loser, twisted deviant, and freak as well as people we normally wouldn't give the time of day.
-S.M. Tomlinson

Online Bob Roller

  • Hero Member
  • *****
  • Posts: 9687
Re: English breechplug
« Reply #7 on: May 16, 2020, 09:35:47 PM »
Quote from: T*O*F on May 16, 2020, 09:19:30 PM
Pics as promised.  Left to right--castings from original Rigby, Pete Allen, Rod England.  Reversed in last picture.  Should be hi-def, so clicking on them will yield larger pics.  Center one is 1", others are 1-1/8"












Maybe someone with CNC equipment could come up with a better lock for
these rifles.I have no more interest in making them or any other locks.
If these are going to be produced by casting I think X rays should be used
as an inspection tool like the Hawken Shop did when Art Resell owned it.
Bob Roller



 
Logged

Offline Metalshaper

  • Hero Member
  • *****
  • Posts: 610
Re: English breechplug
« Reply #8 on: May 17, 2020, 03:31:23 AM »
Dave,

 Thanks for the pictures!! Its helps a visual learner by seeing the parts!!
I've got a bit of research to do before I try and fabricate one or two.. Always interested in learning and  working
on my craft as a hobby machinist..

Hope you and yours are all doing OK??

As well as all the brothers and sisters here on the ALR!!

Respect Always
Jonathan
Logged
Pages: [1]   Go Up
« previous next »