Author Topic: From percussion tot flintlock  (Read 1045 times)

Offline hawkeye

  • Hero Member
  • *****
  • Posts: 763
From percussion tot flintlock
« on: October 05, 2020, 05:46:48 PM »
I'm found a mountain rifle in percussion for sale with Siler lock ,is it easily to transfer it to flintlock,is there anything to concern?
A novice builder!!! Has a 40 caliber barrel 42 inch in 15/16'', not to heavy for offhand?

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19520
Re: From percussion tot flintlock
« Reply #1 on: October 05, 2020, 05:54:56 PM »
That barrel is too heavy for me for an offhand gun. Converting to flint requires the ability to plug the drum hole with a threaded insert that may or may not be coned on the inside for the touchhole, and replacing the lock.
Andover, Vermont

Offline Dale Halterman

  • Global Moderator
  • Hero Member
  • *
  • Posts: 2695
Re: From percussion tot flintlock
« Reply #2 on: October 05, 2020, 06:18:26 PM »
My go to offhand and hunting rifle had a 42", .45 caliber, 15/16" barrel when I was a young buck. Now that I am old and decrepit, I just can't hold it steady anymore. It is really your choice, but it is on the heavy side. I suggest you try it before you buy.

Regarding the lock, if it really is a Siler percussion lock and not the Chambers mountain lock (which would be more appropriate for a mountain rifle), I believe the Siler flint lock is a drop in replacement and you have to do is remove the drum and install a liner like Rich said.

Dale H