« previous next »
Pages: [1]   Go Down

Author Topic: Hunting/Signal Horn  (Read 1851 times)

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18385
  • AKA TimBuckII
Hunting/Signal Horn
« on: October 24, 2020, 05:58:36 PM »
  It is about 17" tip-to-tip and 3 at the bell. The band at the bell is held by three Copper rivets. The mouth piece is made up of two pieces of horn screwed together and turned as one then screwed onto the horn, 5/8-11. The band is held by three iron pins. Kind of neat graining so I left it kind of light.

  Tim C.










Logged

Offline Greg Pennell

  • Hero Member
  • *****
  • Posts: 1522
Re: Hunting/Signal Horn
« Reply #1 on: October 24, 2020, 08:45:33 PM »
Nice one, Tim!  About how big is the hole through the tip?  I’m assuming it’s larger than a usual powderhorn?  I have a pretty large horn I might try to turn into a hunting horn...just because. I was actually thinking of using an antique bugle or trumpet mouthpiece.

Greg
Logged
“Let your gun therefore be the constant companion of your walks” Thomas Jefferson

Offline Kevin

  • Sr. Member
  • ****
  • Posts: 484
Re: Hunting/Signal Horn
« Reply #2 on: October 24, 2020, 10:16:26 PM »
Tim,

Looks like you started with a wonderful horn for the body and your work did it justice.  Very nice.

Kevin
Logged

Offline BOB HILL

  • Hero Member
  • *****
  • Posts: 2281
Re: Hunting/Signal Horn
« Reply #3 on: October 25, 2020, 12:54:23 AM »
Beautiful, Tim. Thanks for sharing.
Bob
Logged
South Carolina Lowcountry

Offline G. Elsenbeck

  • Hero Member
  • *****
  • Posts: 1234
Re: Hunting/Signal Horn
« Reply #4 on: October 25, 2020, 01:10:29 AM »
Tim, very nice looking horn and well done.  The style and color speaks to me of what a well simple, but very usable tool should be.  Well done again Tim.   
Logged
Journeyman in the Honourable Company of Horners (HCH) and a member in the Contemporary Longrifle Association (CLA)

There is a very fine line between "hobby" and "mental illness."

Offline old george

  • Hero Member
  • *****
  • Posts: 710
Re: Hunting/Signal Horn
« Reply #5 on: October 25, 2020, 02:57:21 AM »
Tim, leaving light really accented that pattern. Looks great.

george
Logged
I cannot go to Hades: Satan has a restraining order against me. :)

Offline aaronc

  • Hero Member
  • *****
  • Posts: 793
Re: Hunting/Signal Horn
« Reply #6 on: October 25, 2020, 10:46:06 AM »
Great work Tim...well executed. - Aaron
Logged
- Aaron C
At the work bench.

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18385
  • AKA TimBuckII
Re: Hunting/Signal Horn
« Reply #7 on: October 25, 2020, 03:56:31 PM »
Quote from: Greg Pennell on October 24, 2020, 08:45:33 PM
Nice one, Tim!  About how big is the hole through the tip?  I’m assuming it’s larger than a usual powderhorn?  I have a pretty large horn I might try to turn into a hunting horn...just because. I was actually thinking of using an antique bugle or trumpet mouthpiece.

Greg

  Greg, the hole started out as 1/4" but I used a reamer to open it up a bit.

    Thanks, Tim
Logged

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18385
  • AKA TimBuckII
Re: Hunting/Signal Horn
« Reply #8 on: October 25, 2020, 03:58:30 PM »
 Thanks for the positive comments. These horns are not real popular but the horn was to nice to cut down to Powder horn size. Thinking about drillinf a couple of holes at the bell for a strap.

  Tim
Logged

Offline axelp

  • Hero Member
  • *****
  • Posts: 1547
    • TomBob Outdoors, LLC.
Re: Hunting/Signal Horn
« Reply #9 on: October 25, 2020, 05:24:19 PM »
How does she sound? I had a couple of hounds growing up and I used a calling horn in my attempt to train them. Used to blow that horn "dash dot dot dot" every breakfast and dinner. They seemed to figure out that it was dinnertime alright, but out in the field, nothing would make them break off a scent short of an earthquake. I'd have to run and try and catch em or just wait a few days for them to get hungry and return to the house themselves. LOL
Logged
Galations 2:20

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18385
  • AKA TimBuckII
Re: Hunting/Signal Horn
« Reply #10 on: October 25, 2020, 06:44:13 PM »
Quote from: Ken Prather on October 25, 2020, 05:24:19 PM
How does she sound?

 I can't do much with it. I have made others and people have gotten sounds out of them that I would not have expected. Had a guy at an outdoor show once ask if he could try the one I had on the table. He played a few notes that sounded like a real horn. As he handed it back to me he said, "I'm a professional Trumpet player." A couple hours later he came back and bought it.

  Tim C.
Logged

Offline Marcruger

  • Hero Member
  • *****
  • Posts: 3702
Re: Hunting/Signal Horn
« Reply #11 on: October 26, 2020, 03:21:34 PM »
Great story Tim.  Very cool horn you made here.   :-) 
Logged

Offline Mark Elliott

  • Hero Member
  • *****
  • Posts: 5191
    • Mark Elliott Artist & Craftsman
Re: Hunting/Signal Horn
« Reply #12 on: October 26, 2020, 06:19:07 PM »
Great horn Tim!   I really like the turning job you did on the tip.
Logged

Offline Cory Joe Stewart

  • Hero Member
  • *****
  • Posts: 1862
    • My etsy shop
Re: Hunting/Signal Horn
« Reply #13 on: October 26, 2020, 09:27:17 PM »
Very neat.
Logged
Pages: [1]   Go Up
« previous next »