CVA pa long rifle kit help

[sonny]

Hello, I have been given an old CVA long rifle kit that was never put together since received back in the 70’s. I was looking for someone to assemble all the parts (I have them all) an complete the rifle after 50 years. Can anybody give me a name or phone number of a builder to help me out??? Thanks??? Sonny

[Eric Krewson]

These kits are very easy  to put together, you could do it, just drop everything in place and tighten the screws and it should be shootable. A little bluing and wood finishing and you will be good to go.

Perhaps one of your friends has assembled a similar kit in the past and could steer you in the right direction.

Lots of videos on youtube about this assembly, here is a traditions which is much the same as your CVA.There are several videos in this series.

[GANGGREEN]

As Eric said, with a minimum of tools and not too much time invested, I'm sure you can do it yourself, but if you're truly uncomfortable doing so and need or want some help or to completely commission someone to do it, you should probably mention what part of the world/country you're in.   I guess you could ship it most anywhere but then you're also in for shipping charges both ways.

[sonny]

I am located in northeast PA. I am sure somebody close to me near Wilkes barre could finish this for me pretty quick an lots better.

[GANGGREEN]

I'm in northcentral PA and could probably do it at some point, but my shop is unheated and I don't work out there often.  Besides that, I have several other projects already on the bench or in the pipeline.  You'll find someone who's better than me anyway. 

[duca]

Sonny you can do it. Its funny I've been cleaning up the Basement for a Kibler build and found a CVA rifle that an old friend gave me like 6-7 years ago. It was in BAD shape. No wood was ever removed and the Brass was still in sand-cast state.I wish I had taken a pic of it before I started. This gun looks to never had been fired. Good starter rifle for someone. I'm in Hamilton, NJ

Anthony 

[Eric Krewson]

The guy in the video says to use a Dremel tool, very bad idea, this is the quickest way to screw up any gun kit unless you are very experienced with a Dremel and have used one extensively in the past.

[WKevinD]

PM sent

[recurve]

You can do it here is the same Kit (traditions ) dressed up and shoots great

[recurve]

the wood stock does not carve well so I put inlays and a great color (I believe these are birch stocks and they chip badly when trying to carve)







 this kit has a 1-66 barrel this is 4 shots at 25yrds(crappy trigger) but shoots 2 in same hole
Berks  Pa.

[Dale Halterman]

Did you get my PM?

Dale H

[sonny]

Dale, no ?

[Dale Halterman]

That's odd. It shows up as being sent. No matter. This is it:

I live in southern Monroe county, not real close, but if you don't get any better offers I could probably help you out.

Could you give me a few details on the kit? Flint of percussion? Caliber? Half-stock Hawken type or full stock with the brass plate separating the halves?

Are you looking to have anything done special, or just assemble and finish the kit?

Thanks

Dale H

I see WKevinD also sent you a PM. According to his profile he is from Susquehanna County, which may be closer to you. I used to get in some good deer hunting in Susquehanna County near Lord Pond, a few miles west of Hop Bottom.

Dale H

[WKevinD]

Sonny look at the top of the page where it says"messages" you need to click on that to open your messages.
Kevin

[Hungry Horse]

 These old kits make a reasonable 20mph Leman trade rifle, with little more than a Leman style capbox, a bit of distressing of metal, and wood finishes, and a rawhide dog chew wrapped around the stock splice, oh, and tack it as much as you want. I built one this way, and my club used it for a canoe shoot, and I took it to rendezvous that offered a survival run, so I didn’t have to worry about an expensive custom gun. They’re good for kids, and pilgrims too.

  Hungry Horse

[recurve]

I was given mine by my son (with my wife's input telling him I wanted to build a rifle) they meant well, so I was guilted into the build(I wanted a cabin creek kit/had to start some place) SOoo I built it for my grandsons and they like red doesn't shoot badly and the  lock surprised me very reliable