Author Topic: Naval brass pistol barrel blanks  (Read 1561 times)

Offline Rolf

  • Hero Member
  • *****
  • Posts: 1762
  • There's more than one way to skin a cat.
Naval brass pistol barrel blanks
« on: January 30, 2021, 08:30:20 PM »
Can anyone recommend a supplier for naval brass barrel blanks? I'd like to try to make a pair of 12" long pistol barrels, caliber 0.50.
would like round stock 12.5" long , 1.25 or 1.50 in diameter.  When drilling the bore,I expect there will be some run out.  Plan to correct this by turning between senters. That why the oversized diameter.

Best regards
Rolf

Offline 45-110

  • Hero Member
  • *****
  • Posts: 542
Re: Naval brass pistol barrel blanks
« Reply #1 on: January 30, 2021, 08:56:49 PM »
My source in the 1970's was to find abandoned rotting wooden sailboats around the Great Lakes that had a small inboard motor and pull out the bronze propeller shafts. The ones I recovered where 1 1/4" to 1 1/2" diameter and 4 feet or longer.  Maybe you have some "wrecks" nearby? It sure is some nice material to work with.
kw

Offline Charlie B

  • Full Member
  • ***
  • Posts: 142
    • fcibarrels
Re: Naval brass pistol barrel blanks
« Reply #2 on: January 31, 2021, 02:59:25 AM »
PM sent
Charlie

Offline Nazgul

  • Full Member
  • ***
  • Posts: 191
Re: Naval brass pistol barrel blanks
« Reply #3 on: February 01, 2021, 02:41:40 PM »
Interesting idea. I grew up near Chautauqua Lake in Western NY. One of the Packard brothers (Packard cars) had a house on the lake that was sold after their death. My father's friend Larry had one of the boats they owned rotting on his property and they cleaned it up one year. My Dad was a machinist so Larry gave him the propeller shaft out of it, I have a 5' piece of it.
Gives me and idea for a project!!

Don

Offline jerrywh

  • Hero Member
  • *****
  • Posts: 8885
    • Jerrywh-gunmaker- Master  Engraver FEGA.
Re: Naval brass pistol barrel blanks
« Reply #4 on: February 02, 2021, 05:36:29 AM »
I have some but must check the length.
Nobody is always correct, Not even me.

Offline Rolf

  • Hero Member
  • *****
  • Posts: 1762
  • There's more than one way to skin a cat.
Re: Naval brass pistol barrel blanks
« Reply #5 on: February 02, 2021, 06:03:07 PM »
Thanks Jerry. ;D

Best regards
Rolf

Online bob in the woods

  • Hero Member
  • *****
  • Posts: 4555
Re: Naval brass pistol barrel blanks
« Reply #6 on: February 02, 2021, 06:29:58 PM »
The late Gary Brumfield  built a brass barrelled rifle back in 1981, which he illustrates on his website
[ flintriflesmith.com ]   The barrel was made from a propeller shaft by Don Getz. 

Offline jerrywh

  • Hero Member
  • *****
  • Posts: 8885
    • Jerrywh-gunmaker- Master  Engraver FEGA.
Re: Naval brass pistol barrel blanks
« Reply #7 on: February 03, 2021, 12:45:39 AM »
Sorry  I must have sold them already.
Nobody is always correct, Not even me.

Offline porchdog48

  • Full Member
  • ***
  • Posts: 122
Re: Naval brass pistol barrel blanks
« Reply #8 on: February 03, 2021, 02:22:03 AM »
You might try Aviva Metals in Houston , Texas.

Offline Longknife

  • Hero Member
  • *****
  • Posts: 2091
Ed Hamberg