Author Topic: stains  (Read 1533 times)

Offline hortonstn

  • Hero Member
  • *****
  • Posts: 653
stains
« on: February 12, 2021, 09:43:48 PM »
are alcohol based stains better to use on maple than oil based stains?

Offline Hungry Horse

  • Hero Member
  • *****
  • Posts: 5565
Re: stains
« Reply #1 on: February 12, 2021, 09:57:07 PM »
 Oil stains have a hard time penetrating really good hard maple, and staying there when handled a lot. Alcohol stains are better if they are a genuine wood stain. Some leather stains sun fade Feibing’s comes to mind, some don’t Lincoln’s for example. Acid stains work best on maple. This gets you light, and dark contrast. Then, color tint with alcohol based stain to get golds, reds, light browns.

  Hungry Horse

Offline smallpatch

  • Hero Member
  • *****
  • Posts: 4107
  • Dane Lund
Re: stains
« Reply #2 on: February 12, 2021, 10:33:18 PM »
Oil based stains muddy up figure.  Alcohol based for sure.  Or ferric nitrate.
In His grip,

Dane

Offline hortonstn

  • Hero Member
  • *****
  • Posts: 653
Re: stains
« Reply #3 on: February 12, 2021, 11:01:35 PM »
thanks

Offline Hungry Horse

  • Hero Member
  • *****
  • Posts: 5565
Re: stains
« Reply #4 on: February 13, 2021, 10:15:54 PM »
 If you want to get the maximum contrast out of your curly maple, I would advise you to give the sanded, and whiskered, stock two coats of tanic acid, and when dry, a couple of coats of ferric nitrate, or vinegaroon, blushed after each application with a heat gun. If it turns black, rub it back with scotch rite. If you want golds, or red, highlights then use your stain. It sounds like a lot of work, but its well worth it.

  Hungry Horse

Offline Jeff Durnell

  • Full Member
  • ***
  • Posts: 202
Re: stains
« Reply #5 on: February 14, 2021, 12:33:18 AM »
Great info. Has anyone here used Transtint dyes?

Offline Stoner creek

  • Hero Member
  • *****
  • Posts: 2915
Re: stains
« Reply #6 on: February 14, 2021, 12:50:31 AM »
Great info. Has anyone here used Transtint dyes?
I use the Trans-tint honey amber frequently as a base color only. Mixed 1 parts tint and 4 parts water. Denatured alcohol will work in the place of water. Turns the wood a nice bright yellow.  This will give the figure a nice golden undertone. I’ll follow with my primary stain next. Almost always a nitrate based stain. Only exception would be really soft maple which I don’t use anymore.
« Last Edit: February 14, 2021, 12:53:54 AM by Stoner creek »
Stop Marxism in America

Offline Daniel Coats

  • Hero Member
  • *****
  • Posts: 1403
Re: stains
« Reply #7 on: February 14, 2021, 01:12:18 AM »
Josey Wales : Works wonders on just about everything, eh?

Carpetbagger : It can do most anything.

Josey Wales : [spits tobacco juice on the carpetbagger's coat]  How is it with stains?




Dan

"Ain't no nipples on a man's rifle"

Offline D. Taylor Sapergia

  • Member 3
  • Hero Member
  • *
  • Posts: 12671
Re: stains
« Reply #8 on: February 14, 2021, 01:41:33 AM »
I endorse Hungry Horse's method...nothing else compares.
D. Taylor Sapergia
www.sapergia.blogspot.com

Art is not an object.  It is the excitement inspired by the object.

Online Daryl

  • Hero Member
  • *****
  • Posts: 15846
Re: stains
« Reply #9 on: February 14, 2021, 04:03:23 AM »
This one, needs to be redone with ferric nitrate & tanic acid. Hands and the sun have worn the finish off.

Ahhh - maybe it still looks OK for a while. Taylor could tell you what he stained it with. Wasn't the above.










Daryl

"a gun without hammers is like a spaniel without ears" King George V