Three Flat Horns

[Tim Crosby]

 The largest, bottom is about 7", the base is Pewter with Brass tacks the knob is, threaded 5/8-11. The tip is Pewter the band is held with three pins.
 The middle one is about 6 1/2", its base is Brass with Iron tacks, the knob is threaded as above. The tip is antler.
 The top one is about 5", its base is also Pewter with Brass tacks. Its tip is also antler. The bands are held with six pins each

   Tim C.












scioto country club

[Spalding]

Very nice, Tim. Love the colors on the middle one, especially.

Bob

[oldtravler61]

  Tim very nice work. I like them all but especially # 3.
  Oldtravler

[Dutch Blacky]

Real artwork. I love then all.

[Eseabee1]

Nice looking flat horns.  Great work as always

[aaronc]

Very cool work,...love the color of the middle one.

[old george]

Once again the master of the flattie brings forth another of his creations. Love the color of the middle one Tim.

george

[Stillwater Dan]

I really like all three, being partial to banding I  do have to agree on the color of the middle horn though. All three are great. Great work Tim.

[Tim Crosby]

 Thanks for the complements. On that middle horn; the horn itself had a lot to do with how the color turned out. I used some Saddle Tan oil based leather dye on it, put it on, heated it with a heat gun, rubbed if off, let it dry, buffed it with a rag  then put some Brown shoe polish on it and buffed it again with a brush and rag.

  Tim

[Marcruger]

Those are so very cool Tim.  Love those bird beaks.   :-) 

[smokinbuck]

Tim,
Very nicely done, as usual. Is the dark horn on the left with a single band a powder or small caliber ball horn? How is the stopper made, it looks like a screw in?
Mark

[Tim Crosby]

Tim,
Very nicely done, as usual. Is the dark horn on the left with a single band a powder or small caliber ball horn? How is the stopper made, it looks like a screw in?
Mark

 It is for powder, the tip is Pewter, I was going to make it a screw in but figured the threaded plug in the base was enough. It is held in by the tacks that are the eyes. Those are half inch hole in the bases so they could may be use as ball horns but that was not the original intent.

  Tim
 
  Tim

[smokinbuck]

Very nice.

[Ken G]

Very nice work as always. The one in the middle is my favorite.  I think it is the color.  Thanks for sharing.

Ken

[BOB HILL]

Tim, I don't know how i missed seeing these earlier. Love them.
Bob

[Keith Zimmerman]

Im not sure which one I like the best.  Probably the smallest one.

[wattlebuster]

I like them all