« previous next »
Pages: [1]   Go Down

Author Topic: Third Build Finally Done  (Read 2210 times)

Offline JLayne

  • Full Member
  • ***
  • Posts: 166
Third Build Finally Done
« on: July 02, 2021, 01:43:04 PM »
Finally finished this one up just in time for July 4th. It was built from a Virginia Rifle precarve and parts set from Knob Mountain Muzzleloaders. It has a .50 caliber Rice barrel, Chambers Colonial Virginia Lock. The stain and finish is Kibler’s Iron Nitrate and Tannic Acid with Tried and True Varnish Oil on top. I am still a novice, having assembled a Kibler Colonial kit and a Chambers Early York kit prior to starting this one. Working my way up in difficulty and hope to be able to build from a blank eventually. I made lots of mistakes and got lots of good advice from people on this site along the way. Criitique is welcome.

Thank you.
Jay

P.S.
Sorry for the amateur photography.









Logged

Offline BOB HILL

  • Hero Member
  • *****
  • Posts: 2284
Re: Third Build Finally Done
« Reply #1 on: July 02, 2021, 02:33:12 PM »
Nice rifle. Keep up the good  work.
Bob
Logged
South Carolina Lowcountry

Offline Big Bubba

  • Full Member
  • ***
  • Posts: 118
Re: Third Build Finally Done
« Reply #2 on: July 02, 2021, 03:37:51 PM »
Very nice!
Logged

Offline Stillwater Dan

  • Jr. Member
  • **
  • Posts: 60
Re: Third Build Finally Done
« Reply #3 on: July 02, 2021, 03:44:19 PM »
Looks like your on the right path. Good looking rifle, have fun shooting it. Maybe christen it on Independence Day.
Logged

Offline Ken G

  • Hero Member
  • *****
  • Posts: 5526
  • F & AM #758
Re: Third Build Finally Done
« Reply #4 on: July 02, 2021, 03:46:20 PM »
Nice work.  That turned out real nice.  Clean inletting and wonderful finish.  You have something to be very proud of. 

Thanks for sharing,
Ken
Logged
Failure only comes when you stop trying.

Offline Algae

  • Full Member
  • ***
  • Posts: 196
Re: Third Build Finally Done
« Reply #5 on: July 02, 2021, 04:08:32 PM »
rVy nice, I think you're ready for "The Big Time" :)

Al Jenkins
Logged

Offline Spalding

  • Sr. Member
  • ****
  • Posts: 323
Re: Third Build Finally Done
« Reply #6 on: July 02, 2021, 04:12:43 PM »
Nice rifle, Jay.

Bob
Logged

Offline Rajin cajun

  • Sr. Member
  • ****
  • Posts: 432
  • Ragin Cajun
Re: Third Build Finally Done
« Reply #7 on: July 02, 2021, 05:17:19 PM »
 Very good job ...!👍


Bob
Logged
It’s not the size of the dog in the fight, it’s the size of the fight in the dog !

Offline Mark Elliott

  • Hero Member
  • *****
  • Posts: 5191
    • Mark Elliott Artist & Craftsman
Re: Third Build Finally Done
« Reply #8 on: July 02, 2021, 05:48:03 PM »
What I can see looks good.  I would have slimmed down the comb some more.
Logged

Offline MuskratMike

  • Hero Member
  • *****
  • Posts: 2263
Re: Third Build Finally Done
« Reply #9 on: July 02, 2021, 07:07:41 PM »
What's not to like. Great piece and thanks for sharing it with us.
Logged
"Muskrat" Mike McGuire
Keep your eyes on the skyline, your flint sharp and powder dry.

Offline Not English

  • Hero Member
  • *****
  • Posts: 594
Re: Third Build Finally Done
« Reply #10 on: July 02, 2021, 07:52:58 PM »
Jay,   Looks to me like the next one ought to be from a slab. There's nothing to be intimidated about when starting from a slab. It's actually easier in my opinion, much more freedom to do what you want.
Logged

Offline RJD-VT

  • Full Member
  • ***
  • Posts: 100
Re: Third Build Finally Done
« Reply #11 on: July 06, 2021, 09:22:45 PM »
Looks good. I like the pin escutcheons. And you did a good job with the stain and finish.
Logged

Offline Brian Sweeney

  • Starting Member
  • *
  • Posts: 30
Re: Third Build Finally Done
« Reply #12 on: July 06, 2021, 10:28:27 PM »
  Looks great. I agree,the pin escutcheons are a nice touch. Brian
Logged

Offline Robert Hill

  • Full Member
  • ***
  • Posts: 217
Re: Third Build Finally Done
« Reply #13 on: July 07, 2021, 04:09:20 AM »
Looks good to me. Nice work.
-Robert
Logged

Offline RedRiverII

  • Full Member
  • ***
  • Posts: 167
Re: Third Build Finally Done
« Reply #14 on: July 07, 2021, 04:16:00 AM »
Great completion of an idea I think.  Good job.
Logged

Offline steven baker

  • Jr. Member
  • **
  • Posts: 96
Re: Third Build Finally Done
« Reply #15 on: July 07, 2021, 12:44:41 PM »
Hot dog on that single trigger! Really nice project , take care Steven.
Logged

Offline RedRiverII

  • Full Member
  • ***
  • Posts: 167
Re: Third Build Finally Done
« Reply #16 on: July 07, 2021, 04:12:29 PM »
Nice job buddy.  I like the shop as well,  lots of room to work safely.  I didn't see the bandsaw anywhere,  only kidding,  well 1/2 kidding,  no seriously.  Best of luck on your next venture.  Among the best advice I received from the folks on this wonderful site is "  begin the slab and get your mistakes over with."  I think Craig offered that good advice.
Logged

Offline BOB HILL

  • Hero Member
  • *****
  • Posts: 2284
Re: Third Build Finally Done
« Reply #17 on: July 08, 2021, 12:31:25 AM »
Nice rifle. Keep up the good work.
Bob
Logged
South Carolina Lowcountry

Offline Frozen Run

  • Hero Member
  • *****
  • Posts: 961
Re: Third Build Finally Done
« Reply #18 on: July 08, 2021, 09:15:20 AM »
What do you use the forceps for?
Logged

Offline Robert Hill

  • Full Member
  • ***
  • Posts: 217
Re: Third Build Finally Done
« Reply #19 on: July 08, 2021, 04:30:34 PM »
Looks good to me. Good work.
-Robert
Logged

Offline JLayne

  • Full Member
  • ***
  • Posts: 166
Re: Third Build Finally Done
« Reply #20 on: July 08, 2021, 07:47:15 PM »
Quote from: Frozen Run on July 08, 2021, 09:15:20 AM
What do you use the forceps for?

I used the forceps to hold onto screws and bolts while I fire blued the heads using a small propane torch.
Logged

Offline JLayne

  • Full Member
  • ***
  • Posts: 166
Re: Third Build Finally Done
« Reply #21 on: July 08, 2021, 07:53:35 PM »
Thank you to everyone for your comments and complements. I do want to try a build from a blank at some point, but I would like to watch someone shape a buttstock from a blank first. I tend to learn these things by watching either in person or via video better than by looking at still pictures in a book. Does anyone know of any good videos for sale showing the shaping of a buttstock from a blank?

Thanks,
Jay
Logged

Offline Frozen Run

  • Hero Member
  • *****
  • Posts: 961
Re: Third Build Finally Done
« Reply #22 on: July 08, 2021, 08:00:33 PM »
Quote from: JLayne on July 08, 2021, 07:47:15 PM
Quote from: Frozen Run on July 08, 2021, 09:15:20 AM
What do you use the forceps for?

I used the forceps to hold onto screws and bolts while I fire blued the heads using a small propane torch.

Thank you.
Logged

Offline Ed Wenger

  • Global Moderator
  • Hero Member
  • *
  • Posts: 2457
Re: Third Build Finally Done
« Reply #23 on: July 09, 2021, 12:20:13 AM »
Very nice looking rifle, Jay.  Pioneer Video has one of Mark Silver shaping a stock from a blank that I believe you’d find very helpful.  Best,


          Ed
Logged
Ed Wenger
Pages: [1]   Go Up
« previous next »