« previous next »
Pages: [1]   Go Down

Author Topic: Pistol Lock castings  (Read 1919 times)

Offline Ron Scott

  • Hero Member
  • *****
  • Posts: 1046
Pistol Lock castings
« on: July 26, 2021, 05:37:19 PM »
I am preparing molds for the Pistol mounts intended for my NMLRA seminar. I am curious if there is enough interest in a nice pistol lock to justify the construction of molds. I might just do the external parts and plan for folks to use small Siler internals.

Logged

Offline Rolf

  • Hero Member
  • *****
  • Posts: 1764
  • There's more than one way to skin a cat.
Re: Pistol Lock castings
« Reply #1 on: July 26, 2021, 07:15:28 PM »
I'd be interested in one or two sets depending on price. I'm also interested in the brass castings depending on price.

Best regards
Rolf
Logged

Offline smart dog

  • Global Moderator
  • Hero Member
  • *
  • Posts: 7013
Re: Pistol Lock castings
« Reply #2 on: July 26, 2021, 07:23:24 PM »
Hi Ron,
What is the length of the plate?  I assume you are casting in the chiseled decoration or could some waxes be done with the externals smooth? 

dave
Logged
"The main accomplishment of modern economics is to make astrology look good."

Offline bob hertrich

  • Full Member
  • ***
  • Posts: 139
Re: Pistol Lock castings
« Reply #3 on: July 26, 2021, 09:36:21 PM »
Sounds interesting to me.
Logged

Offline acorn20

  • Hero Member
  • *****
  • Posts: 541
Re: Pistol Lock castings
« Reply #4 on: July 27, 2021, 03:48:04 AM »
Ron, I'd be interested in the chiseled pistol lock AND the brass furniture as well.
Logged
Dan Akers

Offline RedRiverII

  • Full Member
  • ***
  • Posts: 167
Re: Pistol Lock castings
« Reply #5 on: July 27, 2021, 04:36:05 AM »
I'm in for two pistol locks.  If they look like the pics you are showing I can't say no.
Logged

Offline Craig Wilcox

  • Hero Member
  • *****
  • Posts: 2532
Re: Pistol Lock castings
« Reply #6 on: July 27, 2021, 08:19:13 AM »
Ron, you know I'll be in for the pistol molds.  At least two.
Logged
Craig Wilcox
We are all elated when Dame Fortune smiles at us, but remember that she is always closely followed by her daughter, Miss Fortune.

Offline Ron Scott

  • Hero Member
  • *****
  • Posts: 1046
Re: Pistol Lock castings
« Reply #7 on: July 27, 2021, 03:55:33 PM »
I am away from home until later today. I will measure the lock and post the dimensions. Yes, these would be cast with the decorative details.
Logged

Offline stymie

  • Starting Member
  • *
  • Posts: 17
Re: Pistol Lock castings
« Reply #8 on: July 29, 2021, 09:38:35 PM »
Ron I'd be interested in 1 or 2 also.
Logged

Offline Ron Scott

  • Hero Member
  • *****
  • Posts: 1046
Re: Pistol Lock castings
« Reply #9 on: August 04, 2021, 04:20:07 PM »
Dave,

The lock plate is 4 5/8 inches long. The lock would have the decoration cast into it. If you were interested, I could send you waxes that you could carve smooth and have cast smooth.
Logged

Offline Wolfeknives

  • Jr. Member
  • **
  • Posts: 82
Re: Pistol Lock castings
« Reply #10 on: August 04, 2021, 05:05:05 PM »
I would be glad to get two of these. I would also love to get the brass fittings as well.
« Last Edit: August 04, 2021, 05:08:29 PM by Wolfeknives »
Logged
Pages: [1]   Go Up
« previous next »