« previous next »
Pages: [1]   Go Down

Author Topic: coin silver  (Read 3682 times)

eagle24

  • Guest
coin silver
« on: September 18, 2009, 10:23:15 PM »
Anybody know the going rate for junk coin silver?
Logged

Offline Stophel

  • Hero Member
  • *****
  • Posts: 4532
  • Chris Immel
Re: coin silver
« Reply #1 on: September 18, 2009, 10:29:04 PM »
Spot silver is now $17.01.

Bulk silver coins might sell at close to $19 per $1 face value.
Logged
When a reenactor says "They didn't write everything down"   what that really means is: "I'm too lazy to look for documentation."

Offline Tom Currie

  • Hero Member
  • *****
  • Posts: 1294
Re: coin silver
« Reply #2 on: September 18, 2009, 10:31:42 PM »
I am buying worn out silver dollars circa 1900 for about $15.
Logged

eagle24

  • Guest
Re: coin silver
« Reply #3 on: September 18, 2009, 10:52:12 PM »
Quote from: Tom Currie on September 18, 2009, 10:31:42 PM
I am buying worn out silver dollars circa 1900 for about $15.

Just bought 2 for $31 including shipping.  Thanks.
Logged

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: coin silver
« Reply #4 on: September 19, 2009, 03:03:17 PM »
WOW! :o The last old silver dollars I bought I paid $8 each. Glad I bought a bunch of them! I actually use half dollars more often for inlays etc.
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline Dphariss

  • Hero Member
  • *****
  • Posts: 9920
  • Kill a Commie for your Mommy
Re: coin silver
« Reply #5 on: September 20, 2009, 02:59:20 AM »
I just use fine silver rounds or rectangles and don't worry about true coin silver. Its softer than coil silver but the inlays are not going the wear out. Anyone who worries about it not being "traditional" has too much time on his hands.
Dan
Logged
He who dares not offend cannot be honest. Thomas Paine

Offline Brian

  • Hero Member
  • *****
  • Posts: 6364
Re: coin silver
« Reply #6 on: September 20, 2009, 04:48:12 AM »
What's the actual difference between the "old" coin silver - and pure (99.99) silver?  Was it pretty close to pure?
Logged
"This is my word, and as such is beyond contestation"

Offline Rolf

  • Hero Member
  • *****
  • Posts: 1764
  • There's more than one way to skin a cat.
Re: coin silver
« Reply #7 on: September 20, 2009, 01:32:20 PM »
Modern coin silver is 830 parts silver and 70 parts copper(used mainly in forks, spoons, etc.), "old" coin silver can be 825 parts silver.

Sterling silver USA is 925 parts silver, european is 930 parts silver.

Pure silver = fine silver = chemical pure silver = at least 999.9 parts silver.

The higher the content of silver, the lighter color and the more resistant the alloy is to tarnishing. Coin silver has a grayish color, compared to sterling. Coin silver is less malleable and  work hardens alot faster than sterling silver. It's main virtue is that is a bit cheaper than sterling.

Fine silver hardly tarnishes, but its to soft to use for most applications. I use it mainly as silver wire when doing filigree work.


Best regards

Rolfkt
« Last Edit: September 20, 2009, 01:42:00 PM by Rolfkt »
Logged
Pages: [1]   Go Up
« previous next »