« previous next »
Pages: [1]   Go Down

Author Topic: Relief carving instruction.  (Read 1492 times)

Offline Rt5403

  • Full Member
  • ***
  • Posts: 241
Relief carving instruction.
« on: October 06, 2021, 03:41:07 AM »
So I am going to be putting a New England Fowler kit as soon as it comes in. I am looking for some resources and instructions on period carvings moldings. Any good videos or books out there?
Logged

Offline Bill Raby

  • Hero Member
  • *****
  • Posts: 1545
Re: Relief carving instruction.
« Reply #1 on: October 06, 2021, 03:45:54 AM »
There is some carving in these videos

https://rumble.com/user/BillRaby
Logged

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19525
Re: Relief carving instruction.
« Reply #2 on: October 06, 2021, 05:16:58 AM »
Go to the Tutorials section here. Then the woodworking area. Plenty in there.
Logged
Andover, Vermont

Offline D. Taylor Sapergia

  • Member 3
  • Hero Member
  • *
  • Posts: 12671
Re: Relief carving instruction.
« Reply #3 on: October 07, 2021, 02:42:57 AM »
David Price did some great carving tutorials a couple of years ago....in the tutorial forum.
Logged
D. Taylor Sapergia
www.sapergia.blogspot.com

Art is not an object.  It is the excitement inspired by the object.

Offline smart dog

  • Global Moderator
  • Hero Member
  • *
  • Posts: 7014
Re: Relief carving instruction.
« Reply #4 on: October 10, 2021, 02:45:47 PM »
Hi RT,
Here is an original example and my NE fowler inspired by it.  The second thread shows the building process and how I did some of the decoration.  The Hawk fowler is about as decorated as you will find for a mid 18th century New England gun.  Most are fairly plain.

https://americanlongrifles.org/forum/index.php?topic=49909.msg494966#msg494966
https://americanlongrifles.org/forum/index.php?topic=52871.0

dave
Logged
"The main accomplishment of modern economics is to make astrology look good."

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: Relief carving instruction.
« Reply #5 on: October 10, 2021, 03:23:28 PM »
Here's one of Chambers New England fowling kits I did some years ago. The carving is plain and simple. The beaver tails on this one may not be 100% historically correct for New England. This gun was shattered in three places while in the kit form. Through the wrist, through the lock area and through the area of the rear ramrod pipe, total wreck. All invisible now. I should teach a "glue a wreck back together class"..... ;D
http://www.fowlingguns.com/kitgun2.html
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline Rt5403

  • Full Member
  • ***
  • Posts: 241
Re: Relief carving instruction.
« Reply #6 on: October 10, 2021, 05:18:07 PM »
Beautiful gun mike.
Logged
Pages: [1]   Go Up
« previous next »