« previous next »
Pages: [1]   Go Down

Author Topic: What could one build with.....?  (Read 4009 times)

angus

  • Guest
What could one build with.....?
« on: October 05, 2009, 04:24:52 AM »
Several years ago, at a gun makers event, I had purchased some parts(locks and barrels) from some participating instructors. So my question is what to do with the last of a couple of parts. I have a Getz "D" 28 ga. full octagon barrel and a Chambers deluxe flint. Any suggestions what one could finish these into?
Logged

Offline volatpluvia

  • Sr. Member
  • ****
  • Posts: 456
  • Doing mission work in sunny south, Mexico
Re: What could one build with.....?
« Reply #1 on: October 05, 2009, 04:54:05 AM »
Have that D weight barrel reamed out to a twelve gauge and build you a nice fowler.
volatpluvia
Logged
I believe, therefore I speak.  Apostle Paul.

Offline Acer Saccharum

  • Hero Member
  • *****
  • Posts: 19311
    • Thomas A Curran
Re: What could one build with.....?
« Reply #2 on: October 05, 2009, 05:48:42 AM »
Or have the barrel rifled.
Logged
Tom Curran's web site : http://monstermachineshop.net
Ramrod scrapers are all sold out.

Offline Kermit

  • Hero Member
  • *****
  • Posts: 3099
Re: What could one build with.....?
« Reply #3 on: October 05, 2009, 05:54:05 AM »
Or build yourself a smoothrifle. 28ga is near perfect.
Logged
"Anything worth doing is worth doing slowly." Mae West

northmn

  • Guest
Re: What could one build with.....?
« Reply #4 on: October 05, 2009, 01:32:02 PM »
"Smooth rifles"  seemed to exist.  Build it like a rifle with sights. 

DP
Logged

Offline Don Getz

  • Hero Member
  • *****
  • Posts: 6853
Re: What could one build with.....?
« Reply #5 on: October 05, 2009, 03:24:37 PM »
Nothing wrong with a 28 ga. bore, they will shoot a standard .530 ball real well.   The barrel is on the large side so I would probably build an early gun with it, perhaps an early Dickert, or any of those early guns shown in RCA...take your
pick.    Put sights on the barrel and shoot it just  like a rifle, and, if the opportunity arises, you can also shoot shot out of
it.   I have a friend that has killed turkeys with a 28 ga....................Don
Logged

Offline Acer Saccharum

  • Hero Member
  • *****
  • Posts: 19311
    • Thomas A Curran
Re: What could one build with.....?
« Reply #6 on: October 05, 2009, 03:28:14 PM »
Or build an early barn gun, one that is all worn out and been bored smooth. There is someone on this forum who builds barn guns. I forget who, but I think they are old and fairly cranky, yet might be able to post some pictures.

Tom
Logged
Tom Curran's web site : http://monstermachineshop.net
Ramrod scrapers are all sold out.

Offline Ken G

  • Hero Member
  • *****
  • Posts: 5526
  • F & AM #758
Re: What could one build with.....?
« Reply #7 on: October 05, 2009, 03:49:51 PM »
Brother Angus,
Sounds like a good barn gun project to me too OR make that Chamber's deluxe look a little more English and build yourself a Appalachia Mt. bear rifle.  Either way it would be a good all around hunting rifle. 
Cheers,
Ken
Logged
Failure only comes when you stop trying.

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19540
Re: What could one build with.....?
« Reply #8 on: October 05, 2009, 06:19:35 PM »
Shumway featured an early "1770's" Lehigh smooth rifle in Muzzle Blasts in the 1980's that had a swamped full octagon barrel about 42-44" long and was .58 caliber or so.  The gun was very plain, with very strong, bold architecture.  The buttplate was about 2.25" x 5" and the guard had the remnants of the early "double spur".  It's on my "to build" list.  It was a real hoss of a gun.  If you send me an email I could mail you a photocopy of the article.
rpierce@dom.wustl.edu
Logged
Andover, Vermont

angus

  • Guest
Re: What could one build with.....?
« Reply #9 on: October 07, 2009, 03:10:49 AM »
Many thanks for the input and wisdom.
Logged
Pages: [1]   Go Up
« previous next »