« previous next »
Pages: [1]   Go Down

Author Topic: Engraved Bison Horn  (Read 1292 times)

Offline Mark Elliott

  • Hero Member
  • *****
  • Posts: 5191
    • Mark Elliott Artist & Craftsman
Engraved Bison Horn
« on: December 01, 2021, 07:16:40 PM »
I have been working on this two or three weeks.   The horn was provided to me complete and I was just asked to engrave it.  I had engraved another one for this client with my customary fraktur engraving.   The client wanted to fill this horn with engraving.  He initially asked for something inspired by cave or rock paintings.   I suggested something inspired by Micmac engraved horns.   That is what I ended up doing.   I was not trying to copy an existing horn, but be inspired by some of the original motifs.   I wish the quality of the engraving had been better, but my work did improve along the way.   I started out using an x-acto knife with a #12 blade, but I had I hard time working with it in the extreme curves of the horn.  I ended up doing most of the work with a scribe I made out of 1/8" music wire embedded in a large turned maple handle.  The engraved lines stood out pretty well on their own, but I enhanced them with titanium white oil paint that i just rubbed in. 











Logged

Offline rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19538
Re: Engraved Bison Horn
« Reply #1 on: December 01, 2021, 07:24:28 PM »
Very nice. Is that a Micmac style?
Logged
Andover, Vermont

Offline Marcruger

  • Hero Member
  • *****
  • Posts: 3702
Re: Engraved Bison Horn
« Reply #2 on: December 01, 2021, 07:31:56 PM »
That is very cool Mark.   The engraving looks super with the white fill.  Bison is not easy to work with, so that is doubly impressive.  God Bless,   Marc
Logged

Offline Mark Elliott

  • Hero Member
  • *****
  • Posts: 5191
    • Mark Elliott Artist & Craftsman
Re: Engraved Bison Horn
« Reply #3 on: December 01, 2021, 07:59:25 PM »
Quote from: rich pierce on December 01, 2021, 07:24:28 PM
Very nice. Is that a Micmac style?

It was inspired by a Micmac horn.  I won't claim that it is Micmac style.
Logged

Offline Nordnecker

  • Hero Member
  • *****
  • Posts: 1244
Re: Engraved Bison Horn
« Reply #4 on: December 02, 2021, 02:32:45 PM »
That turned out very nice. I like it.
Logged
"I can no longer stand back and allow communist infiltration, communist indoctrination and the international communist conspiracy to sap and impurify our precious bodily fluids."- Gen Jack T. Ripper

Online old george

  • Hero Member
  • *****
  • Posts: 711
Re: Engraved Bison Horn
« Reply #5 on: December 02, 2021, 03:19:47 PM »
Mark,
that is a great horn.

george
Logged
I cannot go to Hades: Satan has a restraining order against me. :)

Offline Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18390
  • AKA TimBuckII
Re: Engraved Bison Horn
« Reply #6 on: December 02, 2021, 03:34:42 PM »
 Your carving is Wonderful Mark, you have a Good hand, Very well done.

     Tim
Logged

Offline Rolf

  • Hero Member
  • *****
  • Posts: 1764
  • There's more than one way to skin a cat.
Re: Engraved Bison Horn
« Reply #7 on: December 02, 2021, 07:27:18 PM »
Beautiful looking horn!

Best regards
Rolf
Logged

Offline hawkeye

  • Hero Member
  • *****
  • Posts: 764
Re: Engraved Bison Horn
« Reply #8 on: December 02, 2021, 08:12:09 PM »
Wow great looking horn sir
Logged

Offline DHouse

  • Full Member
  • ***
  • Posts: 132
Re: Engraved Bison Horn
« Reply #9 on: December 02, 2021, 08:32:29 PM »
Great work! Thank you for sharing. Really like the patterns you went with, it flows well around the piece.
Logged

Offline heinz

  • Hero Member
  • *****
  • Posts: 1158
Re: Engraved Bison Horn
« Reply #10 on: December 08, 2021, 05:01:19 PM »
Nicely done Mark!  I have worked on buffalo horn and know how cancerous it is.
Logged
kind regards, heinz
Pages: [1]   Go Up
« previous next »