Author Topic: 58 Andrew Verner Bucks Co  (Read 2429 times)

Offline B Kauffman

  • Starting Member
  • *
  • Posts: 23
58 Andrew Verner Bucks Co
« on: June 22, 2022, 11:08:18 AM »
.
« Last Edit: June 26, 2022, 08:41:23 PM by B Kauffman »

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: 58 Andrew Verner Bucks Co
« Reply #1 on: June 22, 2022, 03:12:02 PM »
Nifty, I like your patina. The cheek piece looks a little long though. I miss the muzzle loading forum. They love me over there.
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline Daryl

  • Hero Member
  • *****
  • Posts: 15839
Re: 58 Andrew Verner Bucks Co
« Reply #2 on: June 22, 2022, 06:21:37 PM »
Nicely done.
Daryl

"a gun without hammers is like a spaniel without ears" King George V

Offline Ken G

  • Hero Member
  • *****
  • Posts: 5526
  • F & AM #758
Re: 58 Andrew Verner Bucks Co
« Reply #3 on: June 22, 2022, 06:32:32 PM »
Welcome to ALR Kauffman.  Looks good to me.  I like the overall finish as well. 

Ken
Failure only comes when you stop trying.

Offline Bob Gerard

  • Hero Member
  • *****
  • Posts: 1345
    • Powder Horns and Such
Re: 58 Andrew Verner Bucks Co
« Reply #4 on: June 22, 2022, 08:04:28 PM »
I like it. I didn’t know Pecatonica could provide an Octagon to Round barrel for the Verner. Is it rifled?

Offline heinz

  • Hero Member
  • *****
  • Posts: 1158
Re: 58 Andrew Verner Bucks Co
« Reply #5 on: June 22, 2022, 08:54:17 PM »
Nicely done. Welcome to the ALR
kind regards, heinz

Offline yip

  • Hero Member
  • *****
  • Posts: 1050
Re: 58 Andrew Verner Bucks Co
« Reply #6 on: June 22, 2022, 09:45:44 PM »
  B KAUFFMAN  HOW ABOUT A CLOSER LOOK

Offline B Kauffman

  • Starting Member
  • *
  • Posts: 23
Re: 58 Andrew Verner Bucks Co
« Reply #7 on: June 23, 2022, 02:11:57 AM »
I like it. I didn’t know Pecatonica could provide an Octagon to Round barrel for the Verner. Is it rifled?
Doug had it for me upon request.

Offline Bob Gerard

  • Hero Member
  • *****
  • Posts: 1345
    • Powder Horns and Such
Re: 58 Andrew Verner Bucks Co
« Reply #8 on: June 23, 2022, 03:32:22 AM »
It’s a dandy!

Offline Austin

  • Hero Member
  • *****
  • Posts: 502
  • Austin Paul
Re: 58 Andrew Verner Bucks Co
« Reply #9 on: June 23, 2022, 07:31:00 PM »
Good job young man! I like your videos also! You need to come down to Ky sometime so we can corrupt you😂
Eat Beef

Offline duca

  • Hero Member
  • *****
  • Posts: 579
Re: 58 Andrew Verner Bucks Co
« Reply #10 on: June 23, 2022, 08:43:26 PM »
Looks Great! Been watching your videos and really enjoying them. Just watched the one where you interviewed Allen Martin, Love Allen. I have a .50 Schimmel by him

Anthony 
...and on the eighth day
God created the Longrifle...

Offline recurve

  • Hero Member
  • *****
  • Posts: 622
Re: 58 Andrew Verner Bucks Co
« Reply #11 on: June 23, 2022, 09:23:52 PM »
We Need some targets/range reports that .58  should hit the deer  ;D  alot harder than your .45

Offline recurve

  • Hero Member
  • *****
  • Posts: 622
Re: 58 Andrew Verner Bucks Co
« Reply #12 on: June 25, 2022, 04:20:19 AM »
Nice :D

Offline t.caster

  • Hero Member
  • *****
  • Posts: 3730
Re: 58 Andrew Verner Bucks Co
« Reply #13 on: June 25, 2022, 07:04:41 PM »
Welcome to our side! Looks like a fine job on that one. One thing I spotted right off was you filed the sides of the forend slightly below the barrel centerline. That is a nice detail most miss and it makes the rifle look slimmer!
Tom C.

Offline Terry Reynolds

  • Sr. Member
  • ****
  • Posts: 274
Re: 58 Andrew Verner Bucks Co
« Reply #14 on: June 26, 2022, 06:26:24 PM »
I like it! Thanks for sharing.

aka “digger658”

Online Frozen Run

  • Hero Member
  • *****
  • Posts: 961
Re: 58 Andrew Verner Bucks Co
« Reply #15 on: June 26, 2022, 07:43:54 PM »
I like seeing a good, relatively modest rifle. No patchbox, no nose cap, but still a buttplate and a little bit of flair in other areas. It's tastefully balanced. It seems like the temptation is often times to go either extreme poor boy or dolled up to the nines; with some sort of patchbox, capbox, or grease hole being almost mandatory on everything. I'm looking forward to seeing what you make in the future.   

Offline Tony N

  • Hero Member
  • *****
  • Posts: 646
  • Rabbit Hash,Ky
Re: 58 Andrew Verner Bucks Co
« Reply #16 on: June 26, 2022, 08:33:26 PM »
Well done! I like the patina

Tony