Author Topic: Silver Gentleman's Cup (Read 2336 times)

tallbear · « **on:** June 17, 2022, 09:15:21 PM »

Finished up this silver cup this morning......it should be on my table at the Ft Loudoun Market fair next weekend.Stop by and say hi!!!!

Mitch

Stoner creek · « **Reply #1 on:** June 17, 2022, 09:26:32 PM »

Great job Mitch!

tallbear · « **Reply #2 on:** June 17, 2022, 09:29:01 PM »

Quote

Great job Mitch!

Thanks bud....I feel the need to go downtown and visit my friend Basil..................test it out......

Mitch

Tim Crosby · « **Reply #3 on:** June 17, 2022, 09:39:18 PM »

WOW!

Tim

ed lundquist · « **Reply #4 on:** June 17, 2022, 10:11:17 PM »

That certainly is fine! Is that the same size as the one I have? I may need another...hmmmm, I may have a problem. Oh, that is for a gentleman, No problem.

Daniel Coats · « **Reply #5 on:** June 17, 2022, 10:25:17 PM »

Very nicely done! I'm wondering about how big it is how much it holds etc?

DHouse · « **Reply #6 on:** June 17, 2022, 10:56:06 PM »

Wow, that is wild! Blown away. Very nice.

tallbear · « **Reply #7 on:** June 17, 2022, 11:31:09 PM »

Ed

It's the same size

Dan it's roughly shot glass size here is a photo with a quarter for scale

Tim Crosby · « **Reply #8 on:** June 17, 2022, 11:38:26 PM »

The size makes it even more impressive.

Tim

davec2 · « **Reply #9 on:** June 22, 2022, 06:21:44 AM »

Mitch,

Beautiful work !!! Both the silver work and the engraving are superb.

Do you roll the upper lip ? Or is it a separate piece silver soldered in place ?

hawkeye · « **Reply #10 on:** June 22, 2022, 09:35:29 AM »

Amazing craftsmanship is done here
Wow

tallbear · « **Reply #11 on:** June 22, 2022, 08:17:47 PM »

Quote

Do you roll the upper lip ? Or is it a separate piece silver soldered in place ?

Thanks Dave

On these I make the lip(top and bottom and handle) from drawn wire from ingots cast in shop.I've done rolled edges but they take a lot more time which raises the cup cost .

Mitch

davec2 · « **Reply #12 on:** June 23, 2022, 12:33:42 AM »

Thanks Mitch. I can certainly understand why the rolled lip takes so much longer to do....and the wire lip looks great.

Daryl · « **Reply #13 on:** June 23, 2022, 02:54:56 AM »

Fascinating work, Mitch.

Marcruger · « **Reply #14 on:** June 23, 2022, 06:28:58 PM »

I so much enjoy your engraved chevron border. :-)

Ken G · « **Reply #15 on:** June 23, 2022, 08:39:22 PM »

Beautiful work.

Ken

Tecumseh · « **Reply #16 on:** June 28, 2022, 01:14:52 AM »

Beautiful work as always Mitch!

Osprey · « **Reply #17 on:** June 29, 2022, 10:25:53 PM »

I got to handle this at Ft Loudon, looks even better in person! Shame I'm not a gentleman...

bama · « **Reply #18 on:** July 09, 2022, 11:42:08 PM »

Great looking cup Mitch

Bonnie54 · « **Reply #19 on:** August 03, 2022, 10:12:12 PM »

Fantastic peice Mr. Mitch. Good to see you this weekend.

Stoner creek · « **Reply #20 on:** August 03, 2022, 10:39:14 PM »

Hey Mitch,
Maybe you can put a little bit of this in that cute little cup here in a couple of weeks!

Dennis Glazener · « **Reply #21 on:** August 04, 2022, 12:15:48 AM »

Quote from: tallbear on June 17, 2022, 11:31:09 PM

Ed

It's the same size

Dan it's roughly shot glass size here is a photo with a quarter for scale

Nice work Mitch, Doc Holiday needed that twirl in the Tombstone movie

Dennis

tallbear · « **Reply #22 on:** August 04, 2022, 03:38:26 PM »

Thanks everyone for the kind words about my cup,they are appreciated. I have 2 more on the bench and will post them when done.

Quote

Hey Mitch,
Maybe you can put a little bit of this in that cute little cup here in a couple of weeks!

Stoner
Looking forward too it!!!! It's only proper that I test the cup out( strictly in the name of quality assurance

) before it gets shipped to the new owner after the CLA.

Mitch

News:

Author Topic: Silver Gentleman's Cup (Read 2336 times)