« previous next »
Pages: [1]   Go Down

Author Topic: .50 CVA Frontier Hunter Carbine, Bore it out to 28 ga smoothbore for squirrel ?  (Read 703 times)

Offline Sudsy

  • Starting Member
  • *
  • Posts: 47
.50 CVA Frontier Hunter Carbine, Bore it out to 28 ga smoothbore for squirrel ?
« on: January 21, 2024, 07:51:50 AM »
I've had this thing lying around for a quite some time, tried selling it locally, ($250 with the CVA scope kit and offset hammer and a scope) - no interest

Now I'm thinking it might make a good shotgun for the squirrel squirrel woods. I'll have it bored out to .550 (28 gauge), which should be enough to remover the rifling, and jug choked full. With the scope attached it can double as a turkey gun.

Who do we have here that does that kind of work ??
Logged

Offline Gtrubicon

  • Jr. Member
  • **
  • Posts: 73
Re: .50 CVA Frontier Hunter Carbine, Bore it out to 28 ga smoothbore for squirrel ?
« Reply #1 on: January 21, 2024, 08:00:32 AM »
If it makes it useful to you then why not?
Logged

Offline Sudsy

  • Starting Member
  • *
  • Posts: 47
Re: .50 CVA Frontier Hunter Carbine, Bore it out to 28 ga smoothbore for squirrel ?
« Reply #2 on: January 21, 2024, 08:18:18 AM »
Exactly
Who can I send it to to have it done? The job is miles out of my wheelhouse.
Logged

Offline Dennis Glazener

  • Administrator
  • Hero Member
  • *
  • Posts: 19483
    • GillespieRifles
Re: .50 CVA Frontier Hunter Carbine, Bore it out to 28 ga smoothbore for squirrel ?
« Reply #3 on: January 21, 2024, 02:19:19 PM »
Quote from: Sudsy on January 21, 2024, 08:18:18 AM
Exactly
Who can I send it to to have it done? The job is miles out of my wheelhouse.

Check with Bobby Hoyt, he is a member here and his business is:

Freishutz Shop  
Robert A. Hoyt
700 Fairfield Station Rd. 
Fairfield, PA 17320
(717) 642-6696

Dennis
Logged
"I never considered a difference of opinion in politics, in religion, in philosophy, as cause for withdrawing from a friend" - Thomas Jefferson

Offline Sudsy

  • Starting Member
  • *
  • Posts: 47
Re: .50 CVA Frontier Hunter Carbine, Bore it out to 28 ga smoothbore for squirrel ?
« Reply #4 on: January 21, 2024, 05:32:17 PM »
Excellent, thank you
I'll contact him tomorrow
Logged

Offline Sudsy

  • Starting Member
  • *
  • Posts: 47
Re: .50 CVA Frontier Hunter Carbine, Bore it out to 28 ga smoothbore for squirrel ?
« Reply #5 on: January 23, 2024, 12:31:25 AM »
Spoke to Bobby, !@*%&@ nice guy
Will be dropping the barrel off to him to ream out.
Logged

Offline Dphariss

  • Hero Member
  • *****
  • Posts: 9920
  • Kill a Commie for your Mommy
Re: .50 CVA Frontier Hunter Carbine, Bore it out to 28 ga smoothbore for squirrel ?
« Reply #6 on: January 23, 2024, 05:09:20 PM »
How deep are the dovetails?, or screw holes etc. You better know and calculate the wall thickness.
Logged
He who dares not offend cannot be honest. Thomas Paine
Pages: [1]   Go Up
« previous next »