Author Topic: A Gorget with a Twist  (Read 1668 times)

Offline tallbear

  • Global Moderator
  • Hero Member
  • *
  • Posts: 4053
  • Mitch Yates
A Gorget with a Twist
« on: March 10, 2024, 06:00:22 PM »
Something a little different....James Pease  pressed this horn gorget blank and had a concept in mind.I did the carving/ scrimshaw and silver work.It's colored with my homemade Nitrate of iron Stain and is based on an original silver gorget done by the Richardson Silver Shop in Philadelphia which is one of my favorites..

Mitch




Offline smylee grouch

  • Hero Member
  • *****
  • Posts: 7909
Re: A Gorget with a Twist
« Reply #1 on: March 10, 2024, 08:30:04 PM »
Super nice as usual. ;)

Online Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18390
  • AKA TimBuckII
Re: A Gorget with a Twist
« Reply #2 on: March 10, 2024, 11:06:53 PM »
 Another Beauty Mitch, Jim did a nice job on pressing the horn, I'll bet that took some thinking. The whole work looks flawless. The carving design is wonderful. Did you make the chain Too?

   Tim

Offline tallbear

  • Global Moderator
  • Hero Member
  • *
  • Posts: 4053
  • Mitch Yates
Re: A Gorget with a Twist
« Reply #3 on: March 11, 2024, 02:11:17 AM »
Yes Tim I made the chain.It's copied from an original chain found in an 18th century Ottawa village site in Ohio.

Mitch

Offline Keith Zimmerman

  • Hero Member
  • *****
  • Posts: 711
Re: A Gorget with a Twist
« Reply #4 on: March 11, 2024, 02:36:03 AM »
I noticed that at the Horn Guild Show.  Its beautiful.

Offline Marplot

  • Starting Member
  • *
  • Posts: 49
Re: A Gorget with a Twist
« Reply #5 on: March 11, 2024, 03:31:14 AM »
EXCELLENT!
People either survive in the Jungle, or exist in the Zoo. Few recognize the significance of the paradoxical reconciliation of the two. It takes a rare individual who understands how cunning and aggressive one has to be to acquire an Estate in the Jungle.

Offline TDM

  • Hero Member
  • *****
  • Posts: 603
Re: A Gorget with a Twist
« Reply #6 on: March 11, 2024, 07:19:09 AM »
Very fine workmanship. Beautiful art.

Online Tim Crosby

  • Administrator
  • Hero Member
  • *
  • Posts: 18390
  • AKA TimBuckII
Re: A Gorget with a Twist
« Reply #7 on: March 11, 2024, 04:00:18 PM »
Yes Tim I made the chain.It's copied from an original chain found in an 18th century Ottawa village site in Ohio.

Mitch

  I envy your patience, Very fine fine work.

   Tim

Online homerifle

  • Sr. Member
  • ****
  • Posts: 264
Re: A Gorget with a Twist
« Reply #8 on: March 12, 2024, 05:36:10 AM »
I really like this, fine job!

Online old george

  • Hero Member
  • *****
  • Posts: 712
Re: A Gorget with a Twist
« Reply #9 on: March 12, 2024, 03:09:00 PM »
Absolutely stunning, wonderful job.

george
I cannot go to Hades: Satan has a restraining order against me. :)

Offline DHouse

  • Full Member
  • ***
  • Posts: 132
Re: A Gorget with a Twist
« Reply #10 on: March 21, 2024, 06:32:53 PM »
Fantastic work Mitch! Do you use the same kind of gravers on horn as on silver?

Dillon

Offline tallbear

  • Global Moderator
  • Hero Member
  • *
  • Posts: 4053
  • Mitch Yates
Re: A Gorget with a Twist
« Reply #11 on: March 22, 2024, 02:27:21 PM »
Dillon

No,most of this is done with a knife.I used both an exacto knife and a knife similar to an exacto that I made using John Prouds as a pattern.Each line is cut from both sides similar to how a skew chisel is used in carving.

Mitch

Offline DHouse

  • Full Member
  • ***
  • Posts: 132
Re: A Gorget with a Twist
« Reply #12 on: March 22, 2024, 05:12:35 PM »
That must take great control! Very fine work indeed. Thank you for responding. Has my gears turning to do some experimenting.

Dillon

Offline Jim Kibler

  • Hero Member
  • *****
  • Posts: 4474
    • Personal Website
Re: A Gorget with a Twist
« Reply #13 on: March 22, 2024, 06:46:48 PM »
I really like your tree.  Nice

Offline Marcruger

  • Hero Member
  • *****
  • Posts: 3702
Re: A Gorget with a Twist
« Reply #14 on: March 29, 2024, 11:46:41 PM »
Is it even possible for you to make something that isn't really nice Mitch?   Beautiful work.   God Bless,  Marc

Offline aaronc

  • Hero Member
  • *****
  • Posts: 793
Re: A Gorget with a Twist
« Reply #15 on: March 31, 2024, 04:25:43 PM »
Well done Mitch,..what a unique piece.
- Aaron C
At the work bench.

Offline j. pease

  • Full Member
  • ***
  • Posts: 103
Re: A Gorget with a Twist
« Reply #16 on: March 31, 2024, 05:18:50 PM »
I had pressed the gorget blank and wasn't sure what I wanted to do. I saw Mitch's Penn treaty gorget and thought that would be perfect. Turned greater than anticipated..