« previous next »
Pages: [1]   Go Down

Author Topic: WHICH LOCK  (Read 1080 times)

Offline yip

  • Hero Member
  • *****
  • Posts: 1050
WHICH LOCK
« on: May 23, 2024, 04:15:31 PM »
 i'm planning on a Bucks County rifle and i have a problem. which lock should i use, a small or a large Siler, and also how much wood should i have from the bottom of the r/r channel and the bottom of the forearm? with all my measures i have about an 1/8", i'm a little afraid i'm in trouble.
Logged

Offline 45-110

  • Hero Member
  • *****
  • Posts: 543
Re: WHICH LOCK
« Reply #1 on: May 23, 2024, 05:27:02 PM »
Draw it out with the intended barrel size and ramrod.....there is your answer!
Logged

Offline Mike Brooks

  • Hero Member
  • *****
  • Posts: 13415
    • Mike Brooks Gunmaker
Re: WHICH LOCK
« Reply #2 on: May 23, 2024, 06:06:41 PM »
Quote from: yip on May 23, 2024, 04:15:31 PM
i'm planning on a Bucks County rifle and i have a problem. which lock should i use, a small or a large Siler, and also how much wood should i have from the bottom of the r/r channel and the bottom of the forearm? with all my measures i have about an 1/8", i'm a little afraid i'm in trouble.
Large siler. 1/8" is fine if you pay attention.
Logged
NEW WEBSITE! www.mikebrooksflintlocks.com
Say, any of you boys smithies? Or, if not smithies per se, were you otherwise trained in the metallurgic arts before straitened circumstances forced you into a life of aimless wanderin'?

Offline Steeltrap

  • Hero Member
  • *****
  • Posts: 774
Re: WHICH LOCK
« Reply #3 on: May 23, 2024, 06:12:25 PM »
Logged

Offline yip

  • Hero Member
  • *****
  • Posts: 1050
Re: WHICH LOCK
« Reply #4 on: May 23, 2024, 06:49:26 PM »
  i got a Rice barrel thars just shy of 1" at the breech
Logged

Online Jim Kibler

  • Hero Member
  • *****
  • Posts: 4473
    • Personal Website
Re: WHICH LOCK
« Reply #5 on: May 23, 2024, 07:19:18 PM »
The amount of wood shown below the ramrod hole in the above schematic is pretty generous.  Things often work out better if this is less.
Logged

Offline yip

  • Hero Member
  • *****
  • Posts: 1050
Re: WHICH LOCK
« Reply #6 on: May 23, 2024, 08:50:57 PM »
  i plan on using a small Siler, it seems to fit be better large looks a little big
Logged

Offline D. Taylor Sapergia

  • Member 3
  • Hero Member
  • *
  • Posts: 12671
Re: WHICH LOCK
« Reply #7 on: May 23, 2024, 09:29:17 PM »
When I built my A. Verner copy, I used a Getz .50 cal. X 48" long barrel that is 1" at the breech.  In keeping with the original I was emulating, I used a hooked breech plug with a standing breech tang.  I used a large Siler percussion plate and made it into a flintlock using TOW's cock, pan, and frizzen spring which have lots of steel for filing to correct shape.  The large Siler is not too big for this rifle...pictures of original rifle and my copy included here.






Logged
D. Taylor Sapergia
www.sapergia.blogspot.com

Art is not an object.  It is the excitement inspired by the object.

Offline yip

  • Hero Member
  • *****
  • Posts: 1050
Re: WHICH LOCK
« Reply #8 on: May 25, 2024, 07:40:51 PM »
 SPEAKING OF BUCKS COUNTY WHAT HAS HAPPENED TO FLEHTO?, HE'S THE B/C MAN
« Last Edit: May 25, 2024, 08:53:22 PM by yip »
Logged

Online rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19518
Re: WHICH LOCK
« Reply #9 on: May 25, 2024, 07:44:53 PM »
Quote from: yip on May 25, 2024, 07:40:51 PM
SPEAKING OF BUCKS COUNTY WHERE HAS HAPPENED TO FLEHTO?, HE'S THE B/C MAN
Last Active: September 15, 2023
Logged
Andover, Vermont

Offline yip

  • Hero Member
  • *****
  • Posts: 1050
Re: WHICH LOCK
« Reply #10 on: May 25, 2024, 08:15:56 PM »
  SURE HOPE HE'S ALRIGHT!
Logged

Online rich pierce

  • Administrator
  • Hero Member
  • *
  • Posts: 19518
Re: WHICH LOCK
« Reply #11 on: May 25, 2024, 09:42:21 PM »
Quote from: yip on May 25, 2024, 08:15:56 PM
  SURE HOPE HE'S ALRIGHT!

It’s possible that our Fred Lehto has passed away. I found an obit that might refer to him. If so, may he rest in peace.
https://memorials.phillipfuneralhome.com/frederick-lehto/5407355/
Logged
Andover, Vermont

Offline yip

  • Hero Member
  • *****
  • Posts: 1050
Re: WHICH LOCK
« Reply #12 on: May 25, 2024, 09:55:17 PM »
  I RECKON THATS HIM, MAY HE REST IN PEACE!  THANKS RICH
Logged
Pages: [1]   Go Up
« previous next »