Author Topic: Roland Cadle Copy of Rare Stark Tansel Powder Horn  (Read 1221 times)

Offline Tanselman

  • member 2
  • Hero Member
  • ****
  • Posts: 1632
Roland Cadle Copy of Rare Stark Tansel Powder Horn
« on: October 26, 2024, 04:43:34 AM »
Years ago Roland made me a close copy of the only known [at that time] signed "Stark Tansel" powder horn, since I had photo coverage of it. The horn closely matches the original in size and shape. I eventually acquired the original horn, so the copy is offered for sale. Outside curve = 14-3/4" and inside curve = 10-1/2."

NOTE: The butt plug is correctly shaped by Roland but never nailed in place; currently "pressure fit" and can pop out.

Price is $450 + $15 toward Priority Mail shipping. 

 







« Last Edit: October 26, 2024, 11:56:15 PM by Tanselman »

Offline Tanselman

  • member 2
  • Hero Member
  • ****
  • Posts: 1632
Re: Roland Cadle Copy of Rare Stark Tansel Powder Horn
« Reply #1 on: October 29, 2024, 06:26:43 AM »
The Stark Tansel powder horn has a fascinating "hidden story" within its artwork... debated for a while by myself and Roland Cadle. The horn has two similar soldiers on horseback, with the rear horse seemingly trying to run into, or unseat, the front horse's rider. In the tangled vine to the right, there are three faces [2 have partial bodies as well] worked into the design, with two facing right and one facing left, looking at each other.

The debated hidden meaning revolves around John and Timothy being staunch Whigs, and Stark being a staunch Democrat. This horn, while undated, is probably an 1836 election year horn, based on its artwork. I always thought the three figures hidden in the vines represented John and Timothy on one side, i.e. Whigs, looking at Stark, a Democrat, on the other side. Roland thought the two horse soldiers represented the same basic theme, that one party was trying to unseat [figuratively from a horse] the other party. No one knows for sure why such hidden details were included on the horn, but this horn was probably a Tansel member's personal horn with Stark's name across the front, and Timothy's initials in the eagle's shield, and therefore carries a subtle message about the Tansel family and its political views in the mid-late 1830s when the horn was made. Stark's second wife left a written record recalling the "spirited debates" that took place at their house when John and Timothy visited. This horn is a close copy of the original, which is one of the more interesting Indiana era Tansel horns.

Shelby Gallien

 



« Last Edit: October 29, 2024, 06:30:52 AM by Tanselman »

Offline Frozen Run

  • Hero Member
  • *****
  • Posts: 962
Re: Roland Cadle Copy of Rare Stark Tansel Powder Horn
« Reply #2 on: October 29, 2024, 09:11:46 PM »
Why was the butt plug never nailed in place? Is that because that's how the original is? Thank you.

Offline Tanselman

  • member 2
  • Hero Member
  • ****
  • Posts: 1632
Re: Roland Cadle Copy of Rare Stark Tansel Powder Horn
« Reply #3 on: October 30, 2024, 01:08:03 AM »
It was snug for many years, I presume a shrink fit. Roland was known to complete his horns before nailing the butt plug, and I'm guessing it was so snug when he handled it that he just forgot to pin it in place. But I never worried about it, and thought it was probably glued in place... until a couple years ago when it popped out while being handled and showed a clean plug base with no adhesive and no nails. I never asked Roland about it, since I had it for a number of years before I even realized it wasn't secured. I just put the plug back in, turned it until tight, and left it that way. The real horn's plug is pinned.

Shelby Gallien
« Last Edit: October 31, 2024, 11:20:18 PM by Tanselman »

Offline Tanselman

  • member 2
  • Hero Member
  • ****
  • Posts: 1632
Re: Roland Cadle Copy of Rare Stark Tansel Powder Horn
« Reply #4 on: November 06, 2024, 01:37:09 AM »
I have an antique, small drawer pull, just right of use on this copy of the Stark Tansel powder horn by Roland Cadle, that I will include with the horn. The drawer pull is solid brass, mid-late 1800s, nicely tarnished, and its head is 5/8" in diameter... again, a good size for this horn.

Shelby Gallien