« previous next »
Pages: [1]   Go Down

Author Topic: Source of unthreaded, unslotted screw balnks  (Read 4290 times)

Offline smart dog

  • Global Moderator
  • Hero Member
  • *
  • Posts: 7044
Source of unthreaded, unslotted screw balnks
« on: August 25, 2008, 07:32:23 AM »
Hi Guys,
Does anyone know of a source for unthreaded and unslotted steel screw blanks?  Most of the blanks sold by TOW, Dixie, Brownell's are all slotted.  I want to slot and thread the screws myself and I get tired of turning blanks down on a lathe.

dave
Logged
"The main accomplishment of modern economics is to make astrology look good."

ironwolf

  • Guest
Re: Source of unthreaded, unslotted screw balnks
« Reply #1 on: August 25, 2008, 07:40:32 AM »
Logged

Offline TPH

  • Hero Member
  • *****
  • Posts: 923
Re: Source of unthreaded, unslotted screw balnks
« Reply #2 on: August 25, 2008, 03:27:44 PM »
Your best bet will be Brownell's, they sell unslotted, unthreaded blanks. Go to:

http://www.brownells.com/

Type in "screw blanks" and you will find all you need.
Logged
T.P. Hern

Offline smart dog

  • Global Moderator
  • Hero Member
  • *
  • Posts: 7044
Re: Source of unthreaded, unslotted screw balnks
« Reply #3 on: August 25, 2008, 05:46:10 PM »
Thanks Guys,
Blackleys would be very expensive and slow and Brownell's screw blanks are all slotted (I have a set).  They do not show any unslotted screws on their website catalog.  Dixie has blanks but they are expensive.  I was hoping there might be an industrial supplier that sells blanks.

dave 
Logged
"The main accomplishment of modern economics is to make astrology look good."

Offline TPH

  • Hero Member
  • *****
  • Posts: 923
Re: Source of unthreaded, unslotted screw balnks
« Reply #4 on: August 25, 2008, 05:59:12 PM »
Sorry Dave, I didn't pay close enough attention. I have an assortment of unslotted blanks that I got from them 20 or so years ago, maybe I was the last one to buy any so they quit offering them...  :(
Logged
T.P. Hern

Offline T*O*F

  • Hero Member
  • *****
  • Posts: 5131
Re: Source of unthreaded, unslotted screw balnks
« Reply #5 on: August 25, 2008, 08:52:23 PM »
Dave,
I've got some extra #12's that I can part with, both tang and lock.....unthreaded and unslotted.
(My mistake....they are #10's, not 12's)
Contact me off board if interested.  Include price range you are willing to pay.

Others, this is for Dave only.....don't deluge me with inquiries.

« Last Edit: August 27, 2008, 01:07:56 AM by TOF »
Logged
Dave Kanger

If religion is opium for the masses, the internet is a crack, pixel-huffing orgy that deafens the brain, numbs the senses and scrambles our peer list to include every anonymous loser, twisted deviant, and freak as well as people we normally wouldn't give the time of day.
-S.M. Tomlinson
Pages: [1]   Go Up
« previous next »